MX Female Power Cord 1.5m Review 2026 | Price, Specs & Verdict | ProAudio Video

⭐ Expert Review 2026

MX Female Power Cord 1.5m

★★★★☆

₹650

A properly built 10A IEC C13 mains lead for amplifiers, AV receivers and DACs — the cheapest reliability upgrade in any Indian rack.

🛒 Buy Now — Best Price in India

MX Female Power Cord 1.5m is a professional-grade IEC 60320 C13 mains lead built for audio and AV equipment, and at ₹650 in India it is one of the least glamorous but most genuinely useful things you can add to a hi-fi rack. It terminates in a standard Indian 3-pin mains plug at the wall end and a moulded C13 female socket at the equipment end, so it drops straight into the C14 inlet found on virtually every amplifier, AV receiver, CD player, DAC, studio monitor and rackmount processor sold in India. The conductors are multi-stranded oxygen-free copper, the jacket is heat-resistant PVC, and the whole assembly is rated 250V AC at 10A. It is not an audiophile “tuning” cable and does not pretend to be. It is a correctly specified, correctly built replacement for the flimsy 0.5mm² cord that came free in the box.

This cord is aimed at three groups of buyers: people who have just bought a decent integrated amplifier or AV receiver and discovered the supplied lead is thin and short; installers and studio owners who need consistent, safe, standards-compliant mains leads across a rack; and anyone who has had a bundled cord work loose from a C14 inlet mid-film. At ₹650 in India — down from ₹790 — it sits in the sensible middle of the market: well clear of the ₹150 generic leads that use copper-clad aluminium, and well below the ₹3,000-plus “audiophile” power cables whose benefits are far harder to demonstrate.

Power Delivery Performance: What a Better Cord Actually Does

Let us be precise, because this is where power cables attract nonsense. A mains lead will not change the tonal balance of your amplifier. What it can do is stop three measurable problems. The first is voltage drop. A thin, high-resistance conductor loses voltage under load, and a Class AB power amplifier drawing hard on transient peaks is exactly the load that exposes it. The MX Female Power Cord’s multi-strand oxygen-free copper keeps series resistance low enough that a typical 100W-per-channel integrated amp or a 7.2-channel AV receiver in India sees a stable rail even during heavy passages. The second is contact resistance. A loose or oxidised C13 connection is a resistance that varies, and a varying resistance in a mains path is a genuine source of intermittent hum, crackle and — in the worst case — heat. The moulded C13 here grips firmly and the plating resists oxidation in humid Indian coastal conditions. The third is simple mechanical reliability: a cord that stays plugged in. In our experience across rack builds, the majority of “my receiver randomly switched off” calls trace back to a bundled cord that had walked out of its inlet by two millimetres. At ₹650 that problem simply disappears.

Build Quality & Design

The MX cord is unglamorous and well made. The jacket is a flexible heat-resistant PVC that resists the kinking that ruins cheap leads when they are folded behind a cabinet, and it does not take a permanent set after months coiled in a rack. Both terminations are fully moulded rather than screw-assembled, which removes a whole class of DIY failure, and both have integrated strain relief where the conductor meets the connector housing — statistically the single most common point at which a mains lead dies. The Indian 3-pin plug is solid-pinned and sits securely in a standard 6A socket or a spike-protected distribution board without the wobble you get from hollow-pinned imports. The 1.5-metre length is well judged for rack and home-theatre work: long enough to run from a power distribution unit to a component two or three shelves away, short enough that you are not stuffing a metre of surplus cable behind a plinth. Buyers who need a wall-to-rack run can select the MX-3584B 5-metre variant from the same product page at ProAudio Video instead.

Compatibility & Connectivity

The IEC 60320 C13/C14 coupler is one of the most standardised connections in consumer electronics, and that is the real feature here. If your component has a rectangular three-pin recessed inlet — and in an Indian AV rack that means your Marantz or Denon AV receiver, your Rotel or NAD integrated amplifier, your CD player, your outboard DAC, your active studio monitors, your rackmount mixer, your UPS, your PC power supply and even most projectors — this cord fits it. The 10A rating covers everything up to and including large AV receivers and mid-power stereo amplifiers comfortably. Two length options are offered under the same listing: MX-3584 at 1.5 metres and MX-3584B at 5 metres, both at ₹650. There is no shielding, no ferrite, and no filtering built in; if you are chasing mains-borne RF noise you want a dedicated conditioner rather than a cable. There is also no auto-lock latch, which is worth noting if the cord will live in a touring flight case rather than a fixed rack. For a fixed installation in India, the standard moulded C13 is more than adequate, and you can check current stock and pricing directly on the ProAudio Video listing.

Value for Money in India 2026

At ₹650 in India, reduced from ₹790, this is a rational purchase rather than an emotional one. The market splits into three tiers. Below ₹300 you get generic leads that frequently use copper-clad aluminium and thin insulation — fine for a printer, not for a 7.2-channel receiver pulling several hundred watts. Around ₹650 to ₹1,400 you get properly specified 10A OFC cords like this one and MX’s own auto-lock 5-metre model. Above ₹3,000 you enter boutique audiophile territory, where the engineering case becomes considerably harder to demonstrate and the return on your rupee falls off a cliff. For most buyers in India, ₹650 is the point where you have bought all the safety, contact integrity and low-resistance conduction you actually need. If you are running four or five components, buying four or five of these is still less than the cost of a single mid-tier interconnect.

Full Technical Specifications

Who Should Buy the MX Female Power Cord 1.5m?

✅ Buy it if you: have just bought an integrated amplifier, AV receiver, DAC or CD player in India and want to replace a thin bundled cord with something properly rated; are building or re-cabling a home-theatre or studio rack and want consistent, safe 10A leads throughout; have had a component switch off or buzz because its mains lead worked loose from the C14 inlet; or simply need a spare, reliable mains cord to keep in the kit bag at ₹650.

❌ Skip it if you: are powering a very high-current Class A or large monoblock power amplifier, where a heavier published conductor cross-section is the safer specification; need a locking or latching C13 for a touring flight case that gets packed and unpacked weekly; or are expecting an audible tonal improvement from a mains lead — that is not what this ₹650 cord is for, and no honest retailer in India should sell it to you on that basis.