Skip to content

Same-day dispatch across India ·

Pro Audio Video

Cart

Loading your cart…
Hawk

Hawk SXSG010 Trs Male To Xlr Male Cable – 3 Meter

SKU HAWK-SXSG010-TRS-MALE

Original price was: ₹1,150.Current price is: ₹950. Save ₹200 (17%)

  • Price includes GST, invoice provided
  • Dispatched the same day
  • Cash on delivery up to ₹45,000
  • Money-back if it arrives damaged

The Hawk SXSG010 is a 3-metre balanced cable with a 6.35 mm TRS male plug at one end and an XLR male plug at the other.

  • 6.35 mm TRS male to XLR male interconnect
  • 3-metre length for racks and monitor runs
  • Oxygen-free copper conductors, as listed
  • OFC spiral shield, as listed
  • Gold-plated contacts, as listed; cable tie included

Currently out of stock

Notify me when in stock

Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

100% secure checkout · Pay your way
We accept UPI, Google Pay, PhonePe, Paytm, RuPay, Mastercard, Visa and American Express
100% genuine, authorised stock
Official Indian warranty
Same-day dispatch · 7-day returns
Product highlights
  • Connector A6.35mm TRS male
  • Connector BXLR male
  • Cable length3 metres
  • Signal typeBalanced analogue audio
  • ConductorsOxygen-free copper, as listed
  • ShieldingOFC spiral shield, as listed

Description

Hawk SXSG010 TRS Male to XLR Male Cable – 3 Metre

The Hawk SXSG010 is a 3-metre balanced audio cable with a 6.35mm TRS male plug at one end and an XLR male plug at the other. It belongs to Hawk’s Gold Series, and the listing describes oxygen-free copper conductors, an OFC spiral shield and gold-plated connector contacts. This is the interconnect used where a balanced output on a jack meets a balanced input on an XLR, or the reverse: mixer and interface outputs feeding monitor controllers, powered speakers, processors and other professional equipment that mixes the two connector formats.

Key features

  • 6.35mm TRS male to XLR male balanced interconnect
  • 3-metre length for equipment racks and monitor runs
  • Oxygen-free copper conductors, as listed
  • OFC spiral shield, as listed
  • Gold-plated connector contacts, as listed
  • Cable tie included, as listed

Why this connector pairing exists

Professional audio equipment is split between two balanced connector standards. Many interfaces, patchbays and monitor controllers present their balanced connections on 6.35mm TRS jacks, while mixers, powered speakers and outboard processors commonly use XLR. A TRS-to-XLR cable is the direct bridge between the two: the three conductors of the balanced circuit, hot, cold and screen, map across so the balanced signal path stays balanced end to end. Using an unbalanced adapter lead in the same position breaks that symmetry and gives interference a way into the signal, which is why the correct cable matters in this slot.

Balanced working, explained plainly

A balanced line sends the audio signal twice, once in each polarity, over a twisted pair inside the screen. Noise picked up along the run appears equally on both conductors, and the receiving input subtracts one from the other, cancelling the noise while keeping the wanted signal. That is the mechanism that lets balanced cables run beside lighting dimmers, power supplies and computer equipment without the hum and buzz that plague unbalanced connections. The shield around the pair adds a second layer of defence, draining electrostatic interference to ground before it reaches the conductors.

Where the 3-metre length fits

Three metres is the working length of studio and small live rigs: interface to monitors across a desk, mixer to powered speakers at a small venue, or across a rack from a patchbay to outboard gear. It is long enough to route properly, with the cable dressed along walls or through trunking rather than pulled tight in a straight line, and short enough that the excess coils neatly instead of becoming a trip hazard. Balanced topology keeps the signal clean over this distance and considerably further, so the choice of length here is about tidy routing, not a signal limit.

Handling and care

Coil the cable in loose loops rather than wrapping it tightly around an elbow, keep it away from sharp rack edges, and unplug it by gripping the connector body instead of pulling the cable. XLR and TRS contacts that are seated fully and kept clean give years of service; if a connection becomes intermittent, check for a plug that has worked loose or a cable that has been repeatedly crushed under a case lid before suspecting the equipment at either end.

For a balanced TRS-to-XLR link in a studio, rehearsal room or small live rig, the SXSG010 covers the connection in a single 3-metre cable built for exactly that job.

Additional Information

Specifications

Connector A6.35mm TRS male
Connector BXLR male
Cable length3 metres
Signal typeBalanced analogue audio
ConductorsOxygen-free copper, as listed
ShieldingOFC spiral shield, as listed
Contact finishGold-plated, as listed
SeriesHawk Gold Series
Included accessoryCable tie, as listed
BrandHawk
ModelSXSG010
Model / SKUHAWK-SXSG010-TRS-MALE
CategoryCable
ConditionBrand new, sealed box
WarrantyOfficial manufacturer warranty (India)
GST invoiceYes, input credit available

Warranty Information

Buy with peace of mind. The Hawk SXSG010 Trs Male To Xlr Male Cable – 3 Meter comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.

  • Official Indian warranty, as specified by the manufacturer
  • GST invoice with every order, needed for warranty claims
  • We help you raise and follow up warranty claims with the brand

Delivery and Shipping

  • Same-day dispatch on most in-stock orders
  • Delivery anywhere in India; delivery time depends on your location
  • Shipped securely in the original manufacturer box
  • Cash on delivery available on orders up to ₹45,000
  • Tracking details by SMS and email as soon as your order ships

Returns and Refunds

Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.

Read the full return policy

Payment and Security

We accept UPI, Google Pay, PhonePe, Paytm, RuPay, Mastercard, Visa and American Express

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.

Not sure what to buy?

Tell us about your room, your budget and what you listen to. Our team will suggest a setup that fits, or put together a quote for a complete system.

Back to top
Shop all categories
Shop all brands
Popular searches