MX 3724A Heavy-Duty Speaker Stand with Hand Crank

MX 3724A Heavy-Duty Speaker Stand with Hand Crank

The MX 3724A Speaker Stand is a heavy-duty tripod speaker stand with a hand crank, made for raising a PA speaker or a studio monitor to the right height without a second person lifting and holding it. It is rated for loads up to 30 kilograms, which covers most portable PA cabinets, 10-inch and 12-inch powered speakers and compact monitors, and the crank with a push-button system and locking screw lets one person raise the speaker smoothly and lock it in place.

Stands matter more than they look. A speaker sitting on the floor throws its sound at people’s legs and loses clarity at the back of the room, while a speaker raised to head height or above carries speech and music across the audience. The MX 3724A Speaker Stand tripod base with double-cross braces and a safety pin gives that height without the wobble of a light-duty stand, and it folds down for transport between venues.

Why Choose MX 3724A Heavy-Duty Speaker Stand with Hand Crank?

The hand crank is the reason to choose the MX 3724A Speaker Stand over a basic pole stand. With a plain stand, raising a heavy speaker means loosening a collar, lifting the full weight with one hand and tightening with the other, which is awkward and risky on a stage. The crank lets the speaker ride up under control, the push-button system and locking screw hold it, and the safety pin adds a second layer of security so a slipped collar cannot drop the cabinet.

Build quality follows the same logic. Black anodised telescoping sections, strong lightweight steel tubing and tube legs with double-cross braces are chosen to stay rigid under a 30-kilogram load, while the non-scratching locking screw protects the finish during repeated height changes. Foldable legs and a light overall structure keep it practical for mobile DJs, event crews and schools that move gear every week.

Key Features

• Load capacity up to 30 kg: a heavy-duty speaker stand rated for loads up to 30 kilograms, covering most portable PA speakers and monitors.
• Hand crank with push-button system: a hand crank with a push-button system and locking screw for smooth, controlled height adjustment by one person.
• Safety pin for extra security: a safety pin for maximum strength and security, so the speaker cannot drop if a collar loosens.
• Steel tripod with double-cross braces: durable steel construction with tube legs and double-cross braces for solid, wobble-free support.
• Black anodised telescoping sections: black anodised telescoping stand sections that adjust height while resisting scratches from the locking screw.
• Foldable and transport-friendly: a foldable, lightweight design for easy transport between venues, stages and classrooms.

Best Suited For

The MX 3724A Speaker Stand suits mobile DJs, event and PA rental crews, schools and colleges, places of worship, fitness instructors and small bands who raise speakers above the audience. It is the right stand when the speaker is heavy, the height changes often, or one person sets up alone.

Setup and Connection Guide

1. Open the tripod legs fully on a flat, firm surface and check that all three feet touch the ground before loading the speaker.
2. Lower the telescoping section to its minimum, mount the speaker on the top pole, and confirm it sits fully on the mount.
3. Turn the hand crank to raise the speaker to the wanted height, then engage the push-button lock and tighten the locking screw.
4. Insert the safety pin as the final check, give the speaker a gentle push to confirm stability, and only then connect cables and power.
5. To pack down, lower the speaker fully with the crank first, remove the speaker, fold the legs, and carry the stand by the centre pole.

Frequently Asked Questions

How heavy a speaker can the MX 3724A Speaker Stand hold?

It is rated for loads up to 30 kilograms, which covers most portable PA cabinets and compact monitors. Check the speaker’s own weight before use and stay within the rating.

Can one person raise a speaker on it?

Yes, that is the point of the hand crank. The crank raises the load under control, and the push-button system, locking screw and safety pin hold it, so no second person needs to hold the speaker mid-lift.

Is it suitable for outdoor events?

Yes, on flat firm ground. Tripod stands need level footing outdoors, so avoid soft lawns and slopes, keep cable runs clear of the legs, and lower the speaker in strong wind.

Technical Specifications

Explore Related Products

If the MX 3724A Speaker Stand fits your setup, you may also want to look at the FD PA300 Portable PA Speaker, another live listing in the same part of the store.