Audient EVO 8 4-In/4-Out USB Audio Interface

Audient EVO 8 4-In/4-Out USB Audio Interface
Audient EVO 8 is a four-input USB recording interface with four EVO microphone preamps and Smartgain assistance. It provides more simultaneous microphone capacity than EVO 4 for small group recordings and multi-source sessions. Why Choose Audient EVO 8? Four line outputs and two headphone connections make the interface useful for a more flexible studio arrangement. A JFET input supports instrument capture on its shared channel. Audient notes that powering four phantom-powered microphone channels simultaneously requires the appropriate USB-C-to-C host connection; check host power and cabling instead of treating every USB connection as equivalent. Key Features – Four mic preamps: records a larger analogue session than EVO 4. – Smartgain: assists performance-based gain setting. – Four line outputs: supports additional monitoring or routing. – USB-powered design: requires suitable host power for the selected setup. Best Suited For
Home studios, voice production and music recording with a supported computer. Plan the number of simultaneous sources before choosing an interface: a microphone preamp, an instrument socket and a digital expansion port have different jobs. Match the monitoring arrangement to the session so the performer can hear a useful balance of the live source and playback. Setup and Connection Guide
Install the appropriate manufacturer driver and control software for the operating system, then select the interface in the recording application. Connect each source to its intended input type and enable phantom power only for equipment that requires it. Perform the loudest expected passage while setting gain, leaving room below overload. Start headphone and monitor levels low. Choose direct or software monitoring deliberately to avoid hearing doubled audio, and make a short test recording before a full session. Frequently Asked Questions
Can every USB cable power four condenser microphones at once? Audient specifies a USB-C-to-C connection for four phantom-powered channels simultaneously. A USB-A-to-C connection supports the documented lower phantom-power capacity. Check the host and cable before planning that session. Can the line outputs power passive speakers? Line outputs provide an audio signal rather than loudspeaker-driving power. Use powered monitors or a suitable separate power amplifier for passive speakers. Headphone sockets and monitor outputs also serve different loads. Does the advertised channel count equal the number of microphone sockets? Check the physical analogue inputs separately. Total channel counts can include digital expansion, line outputs and headphone routes. External preamps and suitable digital connections may be needed to reach the maximum advertised configuration. Technical Specifications Specification
Detail Model
EVO 8 Recording configuration
4 inputs / 4 outputs Microphone preamps
4 Instrument input
1 JFET, shared channel Line outputs
4 Headphone connections
2 Gain assistance
Smartgain Four-channel phantom power
Appropriate USB-C-to-C connection required Explore Related Equipment
Compare the features and connection requirements of Audient EVO 16 24-In/24-Out USB Audio Interface when planning your setup.

Key specifications:

• Connectivity: USB