Audient ID4 MKII USB-C Audio Interface

Audient iD4 MKII USB-C Audio Interface
Audient iD4 MKII is a compact USB-C recording interface with one console microphone preamp and a separate JFET instrument input. It supports a focused voice or music workflow with stereo monitor outputs and headphone monitoring. Why Choose Audient iD4 MKII? Choose iD4 MKII for a small recording setup where one microphone channel and instrument capture meet the session needs. Its monitor-mix control balances live input against playback, while two headphone socket sizes serve the documented monitoring arrangement. It has no ADAT expansion port; a larger digitally expandable interface is a different choice. Use a suitable USB 3.0 host power connection. Key Features – Console microphone preamp: one mic/line recording channel. – JFET instrument input: direct guitar or bass capture. – Monitor mix: balances live audio against playback. – USB bus power: compact host-powered desktop arrangement. Best Suited For
Home studios, voice production and music recording with a supported computer. Plan the number of simultaneous sources before choosing an interface: a microphone preamp, an instrument socket and a digital expansion port have different jobs. Match the monitoring arrangement to the session so the performer can hear a useful balance of the live source and playback. Setup and Connection Guide
Install the appropriate manufacturer driver and control software for the operating system, then select the interface in the recording application. Connect each source to its intended input type and enable phantom power only for equipment that requires it. Perform the loudest expected passage while setting gain, leaving room below overload. Start headphone and monitor levels low. Choose direct or software monitoring deliberately to avoid hearing doubled audio, and make a short test recording before a full session. Frequently Asked Questions
Does iD4 MKII have two microphone preamps? It has one microphone preamp and a separate instrument input. The two-input description does not mean two XLR microphone channels. Choose iD14 MKII or another appropriate interface when two mic preamps are needed. Can the line outputs power passive speakers? Line outputs provide an audio signal rather than loudspeaker-driving power. Use powered monitors or a suitable separate power amplifier for passive speakers. Headphone sockets and monitor outputs also serve different loads. Does the advertised channel count equal the number of microphone sockets? Check the physical analogue inputs separately. Total channel counts can include digital expansion, line outputs and headphone routes. External preamps and suitable digital connections may be needed to reach the maximum advertised configuration. Technical Specifications Specification
Detail Model
iD4 MKII Recording configuration
2 inputs / 2 outputs Mic preamps
1 Instrument input
1 JFET Monitor outputs
Stereo line outputs Headphone sockets
6.35mm and 3.5mm Host
USB-C with suitable USB 3.0 power ADAT expansion
No Explore Related Equipment
Compare the features and connection requirements of Audient iD14 MKII USB-C Audio Interface when planning your setup.

Key specifications:

• Connectivity: USB-C, USB