
RODE NTG4+ Shotgun Microphone with Built-in Rechargeable Battery
SKU RODE-NTG4-PLUS
Original price was: ₹36,750.₹31,500Current price is: ₹31,500. Save ₹5,250 (14%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
The RODE NTG4+ is a professional supercardioid shotgun microphone with a built-in rechargeable battery giving over 150 hours of operation.
- Internal lithium battery: over 150 hours per 2-hour charge
- Dual power: P48 phantom or internal battery
- Digital 75 Hz filter, -10 dB pad and +6 dB treble boost
- 16dBA self-noise with 135 dB maximum SPL
- Mic clip, windshield, pouch and Micro-USB cable included
In stock· Dispatched the same day

Product highlights
- BrandRODE
Description
RODE NTG4+ Shotgun Microphone with Built-in Rechargeable Battery
The RODE NTG4+ is a professional shotgun microphone for indie film, television, documentary and broadcast work, built around a supercardioid condenser capsule with low-noise circuitry and a clean, natural tone. What sets this microphone apart from other shotgun microphones is its dual power system: it runs on standard 48V phantom power, or on its built-in rechargeable lithium battery, which supplies over 150 hours of operation from a single charge. That battery makes the microphone genuinely independent on location, since it can sit on a boom pole or a camera rig all day without any power source at the other end of the cable, and it recharges in about two hours over Micro-USB.
Why Choose RODE NTG4+?
Shoots choose the RODE NTG4+ because it combines three things that are usually bought separately: a broadcast-quality shotgun capsule, a set of on-mic tone controls, and a power supply that lasts longer than any shooting day. The digitally switched controls on the body give a 75 Hz high-pass filter for cutting rumble, a -10 dB pad for loud sources, and a +6 dB treble boost for extra clarity, and the settings are retained when the microphone is switched off, so a carefully set microphone stays set between setups. Its 16dBA self-noise and 119 dB dynamic range keep quiet dialogue clean while leaving headroom for louder moments, and the lightweight metal body at 176 grams booms comfortably and balances well on a camera. It outputs over a balanced 3-pin XLR connector to recorders, mixers and camera adapters.
Key Features
- Built-in rechargeable battery: over 150 hours of operation per charge, fully recharged in about 2 hours via Micro-USB.
- Dual power operation: runs on P48 phantom power or its internal lithium battery, so it works anywhere.
- Digitally switched tone controls: 75 Hz high-pass filter, -10 dB pad and +6 dB treble boost, with settings retained when powered off.
- Supercardioid shotgun pattern: highly directional pickup that isolates dialogue and rejects off-axis noise.
- Low 16dBA self-noise: clean, hiss-free dialogue with 119 dB dynamic range and 135 dB maximum SPL.
- Lightweight metal body: 176 g microphone supplied with mic clip, foam windshield, pouch and Micro-USB cable.
Best Suited For
The RODE NTG4+ suits indie filmmakers, documentary crews and ENG operators who shoot long days away from mains power, boom operators who want tone control without reaching for a recorder, voice-over artists and livestreamers who want a broadcast shotgun sound in the studio, and camera operators mounting a microphone on a rig that cannot supply phantom power. It is particularly strong for run-and-gun work where setups change quickly and there is no time to re-rig power. Buyers who only record indoors into a phantom-powered interface may prefer the simpler NTG2, and buyers whose camera has only a 3.5 mm input will still need an XLR adapter or recorder, since this microphone has no 3.5 mm output.
Setup and Connection Guide
Charge the internal battery over Micro-USB before the first shoot, or connect to a phantom-powered input if one is available. Mount the microphone in the supplied RM5 clip on a boom pole, pistol grip or camera mount, fit the foam windshield outdoors, and connect the balanced 3-pin XLR output to a recorder, mixer or camera XLR adapter. Press the power button to switch on, then use the digital switches to engage the 75 Hz filter for rumble, the -10 dB pad for loud sources, or the treble boost for extra intelligibility, checking each setting on headphones. Keep a power bank on the kit for top-ups between setups, and remember that the microphone’s settings are retained when it is switched off, so verify them at the start of each new setup.
Frequently Asked Questions
How long does the RODE NTG4+ battery last, and how do I recharge it?
The built-in rechargeable lithium battery provides over 150 hours of operation from a full charge, and it recharges in about two hours from any standard USB power source, such as a computer, a power bank or a USB wall adapter, using the supplied Micro-USB cable.
Can the RODE NTG4+ work without phantom power?
Yes. It can be powered by its internal rechargeable battery alone, which is the point of the Plus model. If phantom power is available, it can run from P48 instead.
Can I connect the RODE NTG4+ directly to a camera with only a 3.5 mm input?
No, not directly. The microphone outputs over a balanced 3-pin XLR connector and has no 3.5 mm output, so a camera without XLR needs a third-party XLR adapter or a portable audio recorder.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | RODE |
| Model | RODE NTG4+ |
| Type | Shotgun condenser microphone |
| Acoustic principle | Line gradient |
| Capsule | 0.50 inch condenser |
| Polar pattern | Supercardioid, end address |
| Frequency range | 20 Hz – 20 kHz |
| Digital controls | 75 Hz high-pass filter, -10 dB pad, +6 dB treble boost (settings retained when off) |
| Output impedance | 200 ohm |
| Maximum SPL | 135 dB SPL |
| Sensitivity | -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz |
| Equivalent noise | 16dBA (A-weighted) |
| Dynamic range | 119 dB |
| Signal-to-noise ratio | 78 dB |
| Power | P48 phantom power or built-in rechargeable lithium battery (over 150 hours, 2-hour Micro-USB charge) |
| Output connection | 3-pin XLR, balanced |
| Dimensions | 278 (H) x 22 (W) x 22 (D) mm |
| Weight | 176 g |
| In the box | Microphone, RM5 mic clip, foam windshield, zip pouch, Micro-USB cable |
Explore Related Products
For a RODE microphone with both XLR and USB connectivity, also explore the RODE PodMic USB.
Additional Information
Specifications
| Brand | RODE |
|---|---|
| Model / SKU | RODE-NTG4-PLUS |
| Category | Microphone |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The RODE NTG4+ Shotgun Microphone with Built-in Rechargeable Battery comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.





