
AUDAC EPA254 4-Channel Class D Power Amplifier
SKU AUDAC-EPA254
Original price was: ₹126,580.₹98,000Current price is: ₹98,000. Save ₹28,580 (23%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
AUDAC EPA254 is a four-channel Class D amplifier for compatible passive-speaker installations. AUDAC specifies 4 × 250W into 4-ohm loads, with output ratings that change according to impedance and operating mode.
Currently out of stock
Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

Product highlights
- Power Output at 4 Ohms4 x 250W RMS stereo
- Power Output at 8 Ohms4 x 130W RMS stereo
- Bridge Output at 8 Ohms2 x 500W RMS
- Amplifier TechnologyClass D with switching power supply
- CoolingConvection cooled (fanless)
- Frequency Response20 Hz to 20 kHz, plus or minus 3 dB
Description
AUDAC EPA254 4-Channel Class D Power Amplifier
AUDAC EPA254 4-Channel Class D Power Amplifier
AUDAC EPA254 is a four-channel Class D amplifier for compatible passive-speaker installations. AUDAC specifies 4 × 250W into 4-ohm loads, with output ratings that change according to impedance and operating mode. Why Choose AUDAC EPA254? The compact rack format, convection cooling and channel controls suit installed sound systems where several amplified routes are required. The EPA254 provides a documented crossover arrangement and bridge modes for suitable system designs. Check the load and wiring of each channel before selection; the 250W figure is per channel under its stated conditions rather than the same rating for every speaker impedance. Key Features – Four amplifier channels: supports multiple audio routes. – Class D technology: efficient rack amplification. – Load-specific ratings: 4 × 250W at 4Ω or 4 × 130W at 8Ω. – Bridge option: documented 2 × 500W at 8Ω bridged. Best Suited For
Rack and installed sound systems with passive loudspeakers and a compatible line-level source. Choose the amplifier around channel routing, speaker impedance and the manufacturer’s stated load conditions. More amplifier power alone does not establish room coverage; loudspeaker sensitivity, placement and listening distance also matter. Setup and Connection Guide
Power down before connecting inputs and speaker cables. Follow the documented channel and bridge-mode connections, verify the actual load on every output and provide the required clearance in the rack. Set input levels conservatively and test each channel separately. Check signal and protection indicators while increasing playback to the required level. If overload or protection occurs, reduce level and investigate the wiring or load rather than repeatedly forcing the amplifier into the same condition. Frequently Asked Questions
Is the EPA254 rated 250W at every speaker load? No. AUDAC specifies different output figures for 4-ohm, 8-ohm and bridge operation. Use the rating and wiring instructions for the actual channel configuration and speaker impedance. Can a speaker power rating alone establish amplifier compatibility? Check impedance, channel mode and the intended operating level alongside power. Speaker and amplifier ratings should be compared on a consistent basis, with appropriate system protection and headroom. Can I connect passive speakers to the line inputs? No. Line inputs accept source audio from suitable equipment. Passive loudspeakers connect to the specified amplified outputs through suitable speaker cables. Technical Specifications Specification
Detail Model
EPA254 Channels
4 Class
Class D Continuous output at 4Ω
4 × 250W Continuous output at 8Ω
4 × 130W Bridge output at 8Ω
2 × 500W Cooling
Convection Frequency response
20Hz–20kHz ±3dB Explore Related Equipment
Compare the features and connection requirements of AUDAC BASO10 10-Inch Passive Subwoofer when planning your setup.
Buying guide: Amplifier Buying Guide
Complete your setup: Pair the AUDAC EPA254 4-Channel Class D Power Amplifier with the AUDAC WX502MK2 2-Way Wall Speaker Pair and the AUDAC KYRA6 Passive Column Speaker.
Additional Information
Specifications
| Power Output at 4 Ohms | 4 x 250W RMS stereo |
|---|---|
| Power Output at 8 Ohms | 4 x 130W RMS stereo |
| Bridge Output at 8 Ohms | 2 x 500W RMS |
| Amplifier Technology | Class D with switching power supply |
| Cooling | Convection cooled (fanless) |
| Frequency Response | 20 Hz to 20 kHz, plus or minus 3 dB |
| Brand | AUDAC |
| Model | EPA254 |
| Channels | 4 |
| Signal to Noise Ratio | Above 90 dB |
| THD N | Below 0.1% at 1 kHz |
| Crosstalk | Above 70 dB at 1 kHz |
| Crossover | Built-in selectable active crossover (high-pass and low-pass) |
| Inputs | Balanced 3-pin XLR female; sensitivity 0 dB (1V RMS); impedance 12 kohms balanced |
| Outputs | 2-pin Euro terminal block (5.08 mm pitch) |
| Protection | DC, short circuit, overheating, overload and signal limiting |
| Dimensions (W x H x D) | 482 x 44 x 330 mm |
| Weight | 4.7 kg |
| Model / SKU | AUDAC-EPA254 |
| Category | Amplifier |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The AUDAC EPA254 4-Channel Class D Power Amplifier comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.







