Bandridge 8K HDMI Cable 20 Metre

Bandridge 8K HDMI Cable 20 Metre

The Bandridge 8K HDMI Cable is a 20-metre HDMI lead for installations where the source and the screen are a long way apart: a projector at the back of a home theatre, a display across a boardroom, or an equipment rack tucked away from the television it feeds. Bandridge, the Dutch AV accessories brand, sells this cable for 8K systems, with standard HDMI connectors, male to male, at both ends. At 20 metres, cable choice and installation method matter more than at any desktop length, so this page sets out what the length means in practice and what to verify before the cable goes into a wall, ceiling or conduit.

Key features

• 20-metre length for long source-to-display runs
• HDMI male to HDMI male connectors
• Sold for 8K television, projector and AV systems
• Suitable for home theatre, boardroom and installed display routes
• One continuous lead, with no extenders or joins in the run

What 20 metres means for an HDMI signal

HDMI signals weaken as cable length grows, and the higher the resolution and refresh rate, the faster they weaken. A 2-metre cable that handles 8K effortlessly proves nothing about a 20-metre run: at this distance, the complete chain — source output, cable, any receiver or switch in between, and the display input — decides which formats lock reliably. That is why the working rule for long HDMI runs is to test first and install second. Connect the full chain on the floor, select the exact resolution and refresh rate you intend to use, and let it run before any cable is fixed in place.

Planning the route

Measure the actual route the cable will take, including vertical drops, bends around corners and the slack needed to reach into cabinets at both ends; a straight-line measurement almost always underestimates. Avoid sharp bends and never pull the cable by its connector shells, and keep the run away from tight bundles with mains power cabling where the layout allows. Leave service access at both ends if you can: long installed cables are the hardest component in a system to replace, so a route that can be re-pulled is worth planning for.

Compatibility and honest expectations

The cable connects any standard HDMI source — media player, games console, computer, set-top box or AV receiver — to any HDMI display, television or projector. An HDMI cable transports the signal the source sends; it cannot add detail that is not in the source, and the usable top format is set by the weakest link in the chain, which at 20 metres may be an intermediate receiver or switch rather than the cable. Bandridge does not publish a separate bandwidth figure for this long-length model beyond its 8K designation, so confirm the format you need works in your chain during the pre-installation test described above.

If your layout genuinely needs twenty metres between source and screen, this Bandridge lead provides the run in a single cable. Plan the route, test the full chain at your target format, and it will serve as a dependable backbone for the installation.