Belden 14 AWG Speaker Cable — Per Metre

Belden 14 AWG Speaker Cable — Per Metre

This Belden 14 AWG speaker cable is bulk two-conductor cable sold by the metre for wiring passive loudspeakers to a power amplifier or AV receiver. You order the length your room actually needs, cut and terminate it yourself, and avoid paying for a finished cable that is too short or coiling up metres of excess behind the rack. The 14 AWG conductor size is the versatile middle ground of speaker wiring: substantial enough for typical home and small commercial runs to bookshelf, floorstanding and surround speakers, while staying flexible and easy to route through trunking, under carpets at edges and behind equipment.

Key features

• 14 AWG conductor size for amplifier-to-speaker wiring
• Two-conductor construction for positive and negative speaker terminals
• Sold by the metre so you order the installed length you need
• Bulk unterminated cable, ready for your choice of connectors or bare-wire connection
• Belden cable as listed, for home audio and installation work

Choosing 14 AWG for your run

Speaker cable choice is a balance between conductor size, run length and speaker load. Over a long run, a thinner cable adds more resistance in series with the speaker, which wastes a little amplifier power and can soften the amplifier control over the woofer. A 14 AWG cable keeps that resistance low across the distances found in most living rooms, studios and small venues, including surround and rear channels that often have the longest routes in the system. For very long runs or demanding low-impedance speakers, stepping up a gauge is the conservative choice; for short runs to efficient speakers, 14 AWG already provides comfortable headroom. Measure each route before ordering and allow extra length for termination and future repositioning.

Installation and termination

Switch the amplifier off before wiring. Run the cable along the planned route, strip a short section of insulation at each end, twist the strands neatly so no stray strand can bridge the terminals, and connect positive to positive and negative to negative at both the amplifier and the speaker, using the conductor marking or jacket print to keep polarity consistent. Consistent polarity across all speakers in a system matters: a speaker wired in reverse still plays, but bass cancels against its correctly wired partner and the stereo image blurs. The cable can be connected bare into binding posts and spring clips or finished with banana plugs or spade connectors where the equipment accepts them; connectors are chosen separately and are not part of this per-metre listing.

Sold by the metre

The selling unit is one metre. Order the total length your installation needs, and if you need specific separate runs, note the individual lengths when ordering so the cable can be supplied conveniently. A photograph of a reel or a short sample shows the cable construction, not the quantity supplied. Keep the route realistic when measuring: follow skirting, door frames and trunking lines rather than straight-line distance across the room, and add slack at both ends so equipment can be pulled forward for connection and servicing without straining the terminations.

Specification honesty

The exact Belden part number for this 14 AWG listing is not supplied, and several Belden speaker cable families share a gauge. For that reason no specific catalogue model, copper grade, jacket rating or in-wall fire classification is claimed here. If your installation requires a documented rating, such as an in-wall or riser classification, confirm the jacket marking on the supplied cable and its matching datasheet before installing it in a wall or ceiling void. What is established is the role and the size: a two-conductor 14 AWG speaker cable from Belden, sold by the metre for amplifier-to-passive-speaker connections.

Measure your routes, order the metres you need, terminate carefully with matched polarity, and this Belden 14 AWG cable will carry amplifier power to your passive speakers cleanly for the life of the system.