
Hawk TMXLU03 Y-Cable 3.5mm to Dual XLR Male (3m)
SKU HAWK-Y-CABLE-3-5MM-TO-DUAL-XLR-MALE-3MTR
Original price was: ₹1,500.₹1,400Current price is: ₹1,400. Save ₹100 (7%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
3m stereo Y-cable: 3.5mm to dual locking XLR male for phones and laptops into professional PA systems.
In stock· Dispatched the same day · Only 1 left

Product highlights
- BrandHawk
- ModelTMXLU03
- Connector A3.5mm stereo male
- Connector B2 x XLR male
- Cable Length3 m
- Cable TypeY-cable (stereo splitter)
Description
Hawk TMXLU03 Y-Cable 3.5mm to Dual XLR Male (3m)
The Hawk TMXLU03 solves a mismatch that shows up at almost every event: the music is on a phone or laptop with a 3.5mm output, and the sound system only offers XLR inputs. This Y-cable takes the stereo signal from the 3.5mm plug and splits it into left and right channels, each on its own XLR male connector, over a 3 metre run. The XLR ends lock into the mixer, stage box or powered speakers, so the playback connection stays put for the whole show instead of relying on a loose adapter.
Key features
- 3.5mm stereo plug to two XLR male connectors
- Stereo signal split into separate left and right XLR channels
- Locking XLR connectors that click into place and stay seated
- 3 m length for booth-to-mixer and desk-to-speaker runs
- One cable instead of adapters stacked on adapters
- Suits phones, laptops and tablets feeding professional PA systems
Consumer source, professional destination
Wedding hosts play ceremony music from a phone. Trainers run workout playlists from a laptop. Corporate AV teams feed presentation audio into an installed system. In each case the source is an everyday device and the destination is professional equipment with XLR inputs on a mixer, wall plate, stage box or powered speaker. The TMXLU03 is built for exactly that handover. Connect the 3.5mm end to the playback device, run the two XLR ends to a pair of inputs, and the source appears on the console like any other stereo feed.
Left and right, split properly
A stereo recording carries two channels, and a pair of XLR inputs expects them one per connector. This cable performs that split internally: one XLR carries the left channel and the other carries the right. On the mixer, assign the two inputs as a stereo pair or pan one hard left and the other hard right, and the original stereo image is preserved. If the system is mono, the engineer can sum or choose channels at the desk. Either way, starting with both channels available keeps your options open, which a single mono adapter lead does not.
Locking XLR ends for live use
XLR connectors latch. Once plugged in, a locking XLR male does not work loose when a cable is tugged, a booth is crowded or a speaker stand gets knocked. That reliability is why XLR is the standard connector in live and installed sound, and it is the main advantage this cable has over a plain 3.5mm to RCA lead plus adapters. The 3 metre length suits the distances that actually occur in venues: playback laptop beside the mixer, phone at the stage edge feeding a stage box, or a media player on a desk reaching powered monitors.
Levels and compatibility checks
A 3.5mm headphone output and a professional XLR input are different worlds, so set levels with care. Start with the source volume low and the mixer channel down, then bring both up gradually. If the XLR inputs are microphone inputs, they expect a much smaller signal than a phone delivers at full volume, so keep the source level moderate and use the mixer’s pad or a line input where available. This cable adapts connectors and splits channels; it does not convert an unbalanced signal into a balanced one, change levels electronically, or replace a DI box where a long balanced run is required.
For event playback, DJ backup feeds and installed AV, the Hawk TMXLU03 is the single cable that gets everyday devices into professional XLR systems cleanly.
Complete your setup: Pair the Hawk TMXLU03 Y-Cable 3.5mm to Dual XLR Male (3m) with the Hawk HM-10 Dynamic Microphone and the Hawk HMS-65 Microphone Stand.
Additional Information
Specifications
| Brand | Hawk |
|---|---|
| Model | TMXLU03 |
| Connector A | 3.5mm stereo male |
| Connector B | 2 x XLR male |
| Cable Length | 3 m |
| Cable Type | Y-cable (stereo splitter) |
| XLR Connector Type | Male, locking |
| Signal | Stereo, split into left and right channels |
| Product Type | Audio adapter cable |
| Intended Use | Phone and laptop playback into XLR mixer and PA inputs |
| Model / SKU | HAWK-Y-CABLE-3-5MM-TO-DUAL-XLR-MALE-3MTR |
| Category | Cable |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The Hawk TMXLU03 Y-Cable 3.5mm to Dual XLR Male (3m) comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.







