Honeywell Cable HDMI 2.1 10 Metre

Honeywell HDMI 2.1 Cable 10 Metre

This 10 metre Honeywell cable is built for the runs that short cables cannot reach: a projector mounted across a room, a console or PC kept in a cabinet, or a source rack feeding a display on the far wall. It is specified by its maker as an HDMI 2.1 cable with up to 48 Gbps of bandwidth, the full Ultra High Speed figure, supporting 8K at 60 Hz and 4K at 120 Hz video, dynamic HDR, Enhanced Audio Return Channel and HDMI Ethernet. Treat those as the product’s own stated specifications, and plan the installation around them sensibly, as the guidance below explains.

Length is the reason this model exists, and length is also where HDMI needs respect. A 10 metre passive run is at the demanding end of high-bandwidth video, so the sensible approach is to connect and test the complete chain at your target resolution and refresh rate before the cable disappears into a wall, ceiling or conduit.

Key features

• 10 metre length for long source-to-display runs
• HDMI 2.1 specification as stated for this product
• Bandwidth up to 48 Gbps as stated by the maker
• Video up to 8K at 60 Hz and 4K at 120 Hz
• Dynamic HDR support
• eARC for high-quality audio return to a soundbar or AV receiver
• Auto Low Latency Mode and Quick Media Switching support
• HDMI Ethernet channel and backward compatibility with earlier HDMI versions

What the stated bandwidth is for

A 48 Gbps link is what separates HDMI 2.1 features from earlier generations. It carries uncompressed 8K at 60 Hz, high-frame-rate 4K at 120 Hz for current consoles and gaming PCs, and dynamic HDR, where brightness and tone are adjusted scene by scene or frame by frame rather than once for a whole film. With older HDMI 2.0 or 1.4 equipment the cable still works, at the limits of the older devices.

Audio return and Ethernet

Enhanced Audio Return Channel lets a television send its full-quality audio back along the same cable to a soundbar or AV receiver, including object-based formats such as Dolby Atmos carried in high-bitrate form, without a separate optical lead. The HDMI Ethernet channel allows compatible devices to share a network connection over the cable, reducing extra wiring where the equipment supports it.

Gaming features

Auto Low Latency Mode lets a console or PC tell the display to switch into its low-latency mode automatically when a game starts. Quick Media Switching removes the brief black screen that usually appears when frame rates change between content.

Installing a 10 metre run well

Measure the real route, including vertical rises and bends, and leave a little slack at both ends so connectors are never under tension. Avoid sharp bends close to the plugs, keep the run away from mains cables where practical, and connect both ends firmly. Most importantly, test picture and audio at the highest mode you intend to use, with the actual source and display, before any fixed installation.

For long-distance connections between modern sources and displays, this Honeywell cable states the complete HDMI 2.1 feature set at a genuinely useful 10 metre length. Test it in place first, install it carefully, and it becomes the quiet link your system stops thinking about.