
MX XLR Male to Female Cable (10m)
SKU MX-XLR-MALE-FEMALE-10MTR
Original price was: ₹2,500.₹2,200Current price is: ₹2,200. Save ₹300 (12%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
The MX XLR Male to Female Cable, 10 metres long, is the standard balanced interconnect for microphones, mixers and powered speakers.
- Male 3-pin XLR to female 3-pin XLR
- Balanced wiring rejects hum, buzz and radio interference
- Locking connectors latch positively and stay seated
- Carries phantom power to condenser microphones
In stock· Dispatched the same day · Only 1 left

Product highlights
- BrandMX
- Cable Length10 m
- Connector AXLR male, 3-pin
- Connector BXLR female, 3-pin
- Signal TypeBalanced analogue audio
- Connector LockingLatching lock on XLR connectors
Description
MX XLR Male to Female Cable (10m)
The MX XLR Male to Female Cable in this 10 metre length is the standard balanced interconnect used to connect microphones and line-level audio equipment. One end carries a male 3-pin XLR connector and the other a female 3-pin XLR, so the cable plugs straight into the output socket of a microphone and the input socket of a mixer, audio interface, powered speaker or stage box. Balanced XLR cabling is the professional audio default because it rejects the hum, buzz and radio interference that long cable runs otherwise pick up, keeping the signal that arrives at the mixer the signal that left the microphone.
Key features
- XLR male to XLR female, the standard microphone cable configuration
- 10 metre length for stage, hall and studio runs
- Balanced 3-pin XLR wiring for low-noise signal transfer
- Locking connectors that latch positively and stay seated
- Connects microphones, mixers, powered speakers and stage boxes
- Suitable as a microphone cable or balanced line-level interconnect
Why balanced XLR cabling stays quiet
A balanced connection sends the audio signal in two opposing copies down the cable. Interference picked up along the run, from mains wiring, lighting dimmers or radio sources, affects both copies equally, and the receiving equipment subtracts one from the other, cancelling the interference while keeping the audio. That is the practical reason XLR leads can run across a stage, past power cables and lighting rigs, and still deliver a clean signal where an unbalanced lead of the same length would hum. The 3-pin XLR format also carries phantom power from a mixer to condenser microphones on the same cable, which unbalanced connections cannot do.
What 10 metres is right for
Ten metres is the working length for medium stages, halls, houses of worship, school auditoriums and rehearsal rooms. It is long enough to place a vocalist, a lectern microphone or a drum overhead where the performance needs it and still reach the mix position or stage box, with sensible slack for routing around stands and along walls rather than stretching the cable in a straight, strained line. At home and in project studios, the same length covers the distance from a recording position to an interface in another part of the room. Always leave a little slack at both ends; a cable that reaches with room to spare outlasts one pulled taut, and connectors under strain are the most common cause of intermittent audio.
Locking connectors and everyday handling
XLR connectors latch when inserted: the female connector’s locking mechanism engages the male socket, and the plug releases only when the latch is pressed. On a stage that matters, because a cable that cannot be kicked loose mid-performance removes one whole category of failure. The same latch makes this cable suitable as an extension in a chain of XLR leads when a longer run is needed occasionally. For a long working life, coil the cable in loose loops rather than tight wraps around the arm, avoid running it where doors close or chair castors roll over it, and unplug by gripping the connector body rather than pulling the cable.
Typical uses
This cable serves anywhere a balanced connection is needed: a dynamic or condenser microphone into a mixer or interface, a mixer output into a powered PA speaker, a stage box to the mixing desk, or balanced line-level links between processors and amplifiers. It is the single most universally useful cable in a live sound kit bag, and the 10 metre version is the length most often reached for. For performers, venues, rental operators and studios alike, the MX XLR Male to Female Cable (10m) is a dependable everyday interconnect built around the format professional audio runs on.
Whether it is the main vocal microphone lead, a powered-speaker link or a spare in the cable trunk, this 10 metre MX XLR cable covers the run cleanly and locks in securely at both ends.
Complete your setup: Pair the MX XLR Male to Female Cable (10m) with the Audio-Technica ATR2100X-USB Dynamic USB-C/XLR Microphone and the Steinberg UR44C 6×4 USB Audio Interface.
Additional Information
Specifications
| Brand | MX |
|---|---|
| Cable Length | 10 m |
| Connector A | XLR male, 3-pin |
| Connector B | XLR female, 3-pin |
| Signal Type | Balanced analogue audio |
| Connector Locking | Latching lock on XLR connectors |
| Application | Microphones, mixers, powered speakers and stage boxes |
| Product Type | XLR microphone and interconnect cable |
| Model / SKU | MX-XLR-MALE-FEMALE-10MTR |
| Category | Cable |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The MX XLR Male to Female Cable (10m) comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.








