A&T IKON150 4K USB Video Conferencing Bar

A&T IKON150 4K USB Video Conferencing Bar

The A&T IKON150 is an all-in-one video conferencing bar that combines a 4K camera, a four-microphone beamforming array and a built-in speaker in a single unit that sits on or under the meeting room display. It connects to a computer over USB and works with the conferencing software you already use, so a huddle room or boardroom gets camera, microphones and sound from one device instead of three separate purchases and three separate cable runs.

The camera uses a Sony IMX415 8-megapixel sensor with a 120-degree field of view, wide enough to frame a full meeting table from a short distance. AI auto framing and speaker tracking keep participants composed in shot as people join, leave or present, and the microphone array picks up voices up to five metres away across a 180-degree pickup range.

Key features

• 4K UHD camera (3840 x 2160 at 30 fps) with Sony IMX415 8 MP sensor
• 120-degree wide-angle field of view for group framing in small and mid-sized rooms
• AI auto framing and speaker tracking with ePTZ and 6x digital zoom
• 4-microphone beamforming array with pickup up to 5 metres and 180-degree coverage
• Built-in 5W speaker for clear far-end audio playback
• DSP audio with echo cancellation, dynamic noise reduction and auto gain control
• USB 3.0 Type-C and Type-A connection, UVC plug-and-play with no drivers to install
• Works with Zoom, Microsoft Teams, Google Meet and other UVC platforms on Windows and macOS

Camera and framing

Video output runs at 4K at 30 or 25 frames per second, with 1080p30, 720p30 and 640 x 360 options for lower-bandwidth calls, encoded as MJPEG or H.264. The f/2.1 mm lens has an F2.2 iris, a minimum focus distance of 50 cm and a minimum illumination of 50 lux, so ordinary meeting-room lighting is sufficient. Exposure and white balance can run automatically or be set manually, 2D and 3D noise reduction clean up low-light images, and the picture can be flipped or mirrored to suit the mounting position. Auto framing widens or tightens the view to fit whoever is in the room, while speaker tracking moves attention to the person talking, which keeps remote participants oriented without anyone operating the camera.

Audio that carries the room

Four high-sensitivity microphones form a beamforming array rated for pickup up to five metres, covering speakers around a typical boardroom table. The built-in DSP applies acoustic echo cancellation, dynamic noise reduction and automatic gain control, and supports full-duplex conversation so both ends can speak naturally without cutting each other off. Audio frequency response is 100 Hz to 24 kHz with a 65 dB signal-to-noise ratio, and the integrated 5W speaker handles far-end voices at meeting volume. An expansion microphone connection is available as an option for larger tables where the built-in array is not enough on its own.

Setup and compatibility

Installation is deliberately simple: mount the bar on the display or place it on the table, connect the USB cable, and select the IKON150 as the camera, microphone and speaker in your conferencing application. As a UVC device it needs no driver installation and is confirmed by A&T for Zoom, Microsoft Teams and Google Meet on Windows and macOS. The unit runs from a DC 12V supply, consumes under 8 watts, measures 500 x 81 x 55 mm and weighs 1.45 kg, so it suits permanent rooms and shared spaces that are reconfigured often. Wall-mount and ceiling-mount accessories are available as options.

Choose the IKON150 when a room needs proper group video and speech from one bar: 4K imaging, a wide lens for the whole table, beamforming microphones and automatic framing, without a separate camera, speakerphone and control system to install and maintain.