Elite Screens DW110XHD3-E12 DayWalker 110-Inch Electric Screen

Elite Screens DW110XHD3-E12

The Elite Screens DW110XHD3-E12 is a 110-inch electric projection screen from Elite’s DayWalker series, and the Elite Screens DW110XHD3-E12 is built for rooms where the lights stay on. Its CineGrey 3D ambient-light-rejecting surface keeps contrast and colour intact under ceiling and room light that would wash out a plain white screen, while the motorised tab-tensioned design drops the picture at the touch of a button and pulls it back into a slim white case when the film is over. For a living room or meeting room that must double as a cinema, the Elite Screens DW110XHD3-E12 gives a 110-inch picture without demanding a blacked-out room.

Why Choose Elite Screens DW110XHD3-E12?

Ambient light is the enemy of projected contrast, and the Elite Screens DW110XHD3-E12 answers it with a material designed for exactly that fight. CineGrey 3D is an angular-reflective ambient-light-rejecting surface that directs the projector’s light toward the audience while rejecting much of the light arriving from above and the sides, so blacks stay dark and colours stay saturated even with lamps on. The 16:9 screen measures 53.9 inches high by 95.9 inches wide in viewing area, a true 110-inch diagonal that suits standard-throw home cinema projectors, and the tab-tensioning keeps that large surface flat and ripple-free. Because the Elite Screens DW110XHD3-E12 is motorised, the screen disappears when it is not needed, which matters in rooms where a fixed frame would dominate the wall.

Key Features

• 110-inch 16:9 picture: The Elite Screens DW110XHD3-E12 shows a 53.9 by 95.9 inch viewing area, a full 110-inch diagonal for films, sport and presentations.
• CineGrey 3D ALR material: An ambient and ceiling light rejecting surface on the Elite Screens DW110XHD3-E12 preserves contrast and colour in lit rooms.
• Electric motorised operation: The screen lowers and raises at the touch of a button, with a quiet synchronous motor and low power consumption.
• Tab-tensioned flat surface: Side tensioning keeps the screen taut and free of waves, so geometry stays true across the whole picture.
• Slim white case: The screen retracts into a white case that suits wall or ceiling mounting in living rooms and offices.
• Standard-throw projection: The screen is made for standard-throw projectors and 4K Ultra HD, Active 3D and HDR content.

Best Suited For

The screen suits living-room home cinemas that cannot be fully darkened, family rooms where the screen must retract after use, offices and classrooms presenting in lit rooms, and restaurants or showrooms running sport and presentations during the day. It is a standard-throw screen, so it pairs with a conventional projector placed across the room rather than an ultra-short-throw projector sitting beneath the screen. Buyers should check that the wall or ceiling run allows the full case width plus the drop, and that the projector’s throw distance fills a 110-inch 16:9 image from its mounting position.

Setup and Connection Guide

Mount the screen case to the wall or ceiling with the supplied brackets, making sure it is level and centred on the seating position, and connect mains power. Lower the screen fully and check that the viewing area sits at a comfortable height, with the centre of the picture roughly at seated eye level, then position the projector so its image fills the 53.9 by 95.9 inch area without overshoot onto the black masking. Focus and align the projector, test the raise and lower cycle several times, and confirm the tab-tensioned surface hangs flat before the first full viewing session.

Frequently Asked Questions

What size is the screen?

The screen is a 110-inch diagonal screen in 16:9 format, with a viewing area of 53.9 inches high by 95.9 inches wide. The 110 in the model code matches the diagonal size.

Can the screen be used with an ultra-short-throw projector?

No. The screen uses CineGrey 3D material for standard-throw projectors, and ultra-short-throw projectors need a dedicated ceiling-light-rejecting screen designed for projection from below, such as Elite’s Aeon CLR range.

Is the screen a fixed frame screen?

No. The screen is an electric motorised screen that retracts into its case, unlike a fixed frame screen that stays on the wall permanently. Its tab-tensioning gives it the flat surface of a fixed screen while it is down.

Technical Specifications

Explore Related Products

For a smaller 100-inch electric screen from the same catalogue, see the Elite Screens Electric 100XH Projection Screen (100-inch), and for an India retailer’s reference information see the Elite DayWalker series listing.