
Bowers & Wilkins
Bowers & Wilkins CCM382- 8 Inches, 2-way In-ceiling Speaker (each)
₹50,500
Notify meSame-day dispatch across India ·Cash on delivery up to ₹45,000
Need advice? Chat with an expertSKU POLK-AUDIO-ES90-HEIGHT-SPEAKER
Original price was: ₹45,000.₹37,000Current price is: ₹37,000. Save ₹8,000 (18%)
Polk Audio Signature Elite ES90 height modules (pair) — add Dolby Atmos overhead effects to your system without in-ceiling installation.
Currently out of stock
Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

The Polk Audio Signature Elite ES90 is a pair of Dolby Atmos-certified height modules that add the overhead dimension of immersive soundtracks without any in-ceiling installation. Each module sits on top of a compatible Signature Elite floorstanding or bookshelf speaker and fires its drivers upward at an angle, so sound reflects from the ceiling and arrives at the listening seat from above. Rain, helicopters, crowd ambience and the vertical movement in object-based mixes gain a physical sense of height that a flat front soundstage cannot create.
The ES90 is shaped and padded specifically to sit securely on the Polk Signature Elite ES20 bookshelf and the ES55 and ES60 tower speakers, and it also fits the earlier Signature S20, S55 and S60 models. A moulded rubber base isolates the module from the speaker below, preventing rattles and buzzes during loud passages. It is not designed for the smaller ES15 or ES50 models, whose top panels are too narrow to support it properly.
Most add-on height speakers use small 3- or 4-inch drivers that struggle to produce anything below the upper midrange, leaving reflected effects thin and detached from the rest of the soundtrack. The ES90’s 5.25-inch woofer works down to genuinely useful frequencies, so a helicopter pass or a crashing wave carries weight as it moves overhead. That fuller range also helps the modules when a receiver upmixes two-channel or 5.1 material into the height channels: ambience and crowd noise sound like a place, not a trickle of treble from the ceiling.
Ceiling-reflection height speakers work best with a flat, reflective ceiling of typical height, roughly between 2.3 and 4 metres, and with the listening position a reasonable distance from the front speakers. Once the modules are placed, connection is a single run of speaker cable per module to the receiver’s height or assignable surround outputs, followed by the receiver’s usual level calibration, which sets distance and delay for the reflected path. Because nothing is cut into the ceiling, the whole upgrade is reversible — useful in rented homes or rooms where in-ceiling speakers are not an option.
The ES90 completes the immersive layer of a Signature Elite home theatre: ES55 or ES60 towers (or ES20 bookshelves) at ear level, an ES30 or ES35 centre, ES15 or ES20 surrounds and an ES-series subwoofer below. Every model shares the Terylene tweeter and Dynamic Balance driver philosophy, so the soundfield stays coherent as effects move through it.
For owners of compatible Signature Elite speakers, the ES90 is the simplest route into Dolby Atmos and DTS:X: place the pair on top, run two cables, and the ceiling becomes part of the system.
Buying guide: Ceiling Speaker Buying Guide
Complete your setup: Pair the Polk Audio Signature Elite ES90 Dolby Atmos Height Speakers (Pair) with the POLK AUDIO HTS 10 Powered Subwoofer with Power Port Technology and the Denon AVR-S760H 7.2-Channel 8K AV Receiver Black.
| Speaker type | Dolby Atmos height module (pair) |
|---|---|
| Woofer | 5.25" mica-reinforced polypropylene |
| Tweeter | 1" Terylene dome with waveguide |
| Frequency response (-3 dB) | 142 Hz - 26 kHz |
| Recommended amplifier power | 20 - 150 W per channel |
| Sensitivity | 86 dB (2.83 V / 1 m) |
| Frequency response (-10 dB) | 52 Hz - 40 kHz |
| Nominal impedance | 4 ohms (8-ohm compatible) |
| Crossover frequency | 2,200 Hz |
| Compatibility | Polk ES20, ES55, ES60; Signature S20, S55, S60 |
| Terminals | 5-way nickel-plated binding posts |
| Base | Moulded rubber isolation pad |
| Dimensions (W x H x D) | 189 x 186 x 306 mm |
| Weight | 3.8 kg each |
| Sold as | Pair |
| Series | Polk Signature Elite |
| Brand | Polk Audio |
| Model / SKU | POLK-AUDIO-ES90-HEIGHT-SPEAKER |
| Category | Ceiling Speakers |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Buy with peace of mind. The Polk Audio Signature Elite ES90 Dolby Atmos Height Speakers (Pair) comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.
Tell us about your room, your budget and what you listen to. Our team will suggest a setup that fits, or put together a quote for a complete system.