TAGA Harmony TAV-606 V.3 5.0 Speaker Package (Black)

TAGA Harmony TAV-606 V.3 5.0 Speaker Package (Black)

The TAGA Harmony TAV-606 V.3 is a complete 5.0 home theatre speaker package in black, supplying the five main channels of a surround system in one matched set: a pair of TAV-606F V.3 floorstanding speakers for the front left and right channels, a TAV-606C V.3 centre speaker, and a pair of TAV-606S V.3 surround speakers. The V.3 edition is a thorough redesign of one of TAGA’s best-selling packages, with revised cabinets, upgraded drivers and reworked crossovers. Unlike compact satellite packages, this system uses full-size front towers with twin bass drivers, so film soundtracks get the scale and dynamic headroom they are mixed for, and the five speakers share the same tweeter and voicing so effects pan around the room without changing character as they move.

Key features

• Complete 5.0 package: Front floorstanders, centre and surrounds in one matched set, voiced together for seamless surround panning.
• Three-way front towers: Each TAV-606F V.3 uses four drivers: twin 6.5-inch bass drivers, a 5.25-inch midrange and a 1-inch silk-dome tweeter.
• TWG waveguide tweeters: The 25 mm silk dome sits in TAGA’s Waveguide faceplate, which controls dispersion for clear, even high frequencies on and off axis.
• TLIE enclosures: Taga Low Interference Enclosures use MDF construction, 12 mm walls with a 15 mm front panel on the floorstanders, to suppress cabinet resonance.
• Front frequency response: The towers cover 40 Hz to 25 kHz, deep enough that film effects and music bass carry real weight without assistance.
• Bi-wiring and bi-amping: The floorstanding speakers provide dual terminals for bi-wire or bi-amp connection where an amplifier supports it.
• Front bass-reflex ports: A single front-firing reflex port with TAGA’s low-turbulence BOM design lets the towers stand closer to a wall than rear-ported designs allow.
• Receiver-friendly load: A 6 ohm impedance across the package and 90 dB front sensitivity suit mainstream AV receivers.

The front speakers: TAV-606F V.3

The towers do most of the work in this system. Their midrange driver uses a rigid, light yellow glass-fibre cone intended for a rich, spacious midband, while the twin paper-cone bass drivers use heavy-duty voice coils for power handling. Crossover points are set at 500 Hz and 3.8 kHz. Each tower measures 98 x 23 x 25 cm excluding spikes and weighs 13.5 kg. Power handling is quoted as 90 W RMS with recommended amplification of 20 to 120 W, and sensitivity of 90 dB means ordinary AV receivers reach cinema listening levels without strain. In stereo, the same towers serve as a full-range music pair, which makes the package a sensible single purchase for rooms that combine film and music duty.

Centre and surround speakers

The TAV-606C V.3 centre is a two-way, three-driver design with two 4-inch bass-midrange drivers flanking the same TWG tweeter, a 4.5 kHz crossover, 88 dB sensitivity and a 55 Hz to 25 kHz response; it measures 16.5 x 43 x 14.5 cm and weighs 3.32 kg, and wall-mount fittings are included. The TAV-606S V.3 surrounds are two-way designs with a single 4-inch bass-midrange driver, 86 dB sensitivity and the same 55 Hz to 25 kHz response, at 26.5 x 16.5 x 14.5 cm and 2.34 kg each, again with a wall mount included. Centre and surrounds are rated for 20 to 100 W amplification at 50 W RMS. Keeping the drive units in the same family across all five cabinets is what keeps a voice consistent as it moves from a front speaker into the centre or off into the surrounds.

Completing the system

As a 5.0 package, the set deliberately leaves the subwoofer choice open: the towers already reach 40 Hz, and a separate active subwoofer can be added where the deepest effects channel content is wanted, with the AV receiver’s bass management steering low frequencies appropriately. Any modern AV receiver with five amplified channels drives the package directly. The black vinyl laminate finish keeps the five cabinets visually consistent, and the towers’ aluminium spikes finish the installation on hard floors or carpet.

The TAV-606 V.3 package is a straightforward route to a full-size surround system: matched speakers throughout, proper floorstanding fronts, and no weak satellite channels to upgrade later.