Skip to content

Same-day dispatch across India ·

Pro Audio Video

Cart

Loading your cart…

Best Microphone Accessories in India 2026 | Stands, Pop Filters, Shock Mounts & More

A microphone is only half of a recording setup. The other half is the accessories that hold it, protect it and connect it: the stand that puts it at the right height, the shock mount that keeps floor vibration out of the recording, the pop filter that stops plosive thumps, the windscreen that tames wind and breath noise, and the cables, clips and DI boxes that get the signal cleanly to the mixer. This guide covers the best microphone accessories in India in 2026, chosen from the live catalogue at Pro Audio Video; every product below is in stock and links to its live product page.

Quick answer: If you are setting up a podcast or home studio from scratch, buy a stand, a pop filter and a windscreen first. The Bespeco MS16 2-in-1 stand at ₹5,499, the Hawk PS03 pop filter at ₹1,000 and the Hawk WS01 windscreen at ₹590 come to ₹7,089 and cover the three accessories that make the biggest audible difference. If you record with a Sennheiser MK 4 condenser microphone, add the Sennheiser MKS 4 shock mount at ₹5,990 and the MKW 4 foam windscreen at ₹1,590, both made for that microphone. All prices below were checked live on the Pro Audio Video store on 22 November 2026.

This guide is about accessories only, not microphones themselves. The closest existing guide, on the best microphone for podcasting, covers microphones; this one covers everything around them. Of the 51 products in the Microphone Accessories category, only 16 are in stock, and 12 of those are genuine microphone accessories — the rest are either out of stock or miscategorised items that do not belong here. So this guide is deliberately built around accessory types and buying advice, with 12 honest in-stock picks, rather than a long list of products you cannot actually buy. All products are genuine, with brand warranty and a GST invoice.

Comparison Table: Microphone Accessories at a Glance

ProductBest forTypeKey specificationPriceLink
Sound X SMS-01 Pro Mic StandPodcast / streaming standFoldable boom stand920–1525 mm height; 800 mm boom arm; foldable₹3,900 (MRP ₹4,034)View
Bespeco MS16 2-IN-1 Microphone StandStudio / rehearsal stand2-in-1 straight or boom standStraight or telescopic-boom use; round base₹5,499 (MRP ₹6,060)View
Sennheiser MKS 4 Shock MountMK 4 / MK 8 shock mountOpen-ring elastic suspension mountFor Sennheiser MK 4 and MK 8 condenser microphones₹5,990 (MRP ₹7,400)View
Elgato Wave Pop FilterElgato Wave pop filterDual-layer steel mesh pop filterMade for Wave:1 and Wave:3; magnetic attachment; 30 g₹3,500 (MRP ₹5,250)View
Hawk PS03 Microphone Pop FilterBudget pop filterGooseneck pop filter with clampMesh screen on flexible gooseneck; clamps to a stand₹1,000 (MRP ₹1,200)View
Sennheiser MKW 4 Foam Windscreen for MK 4 MicrophoneMK 4 windscreenFoam windscreenMade for the Sennheiser MK 4; reduces plosives and breath noise₹1,590 (MRP ₹2,190)View
Hawk WS01 Microphone WindscreenGeneral windscreenFoam windscreenCuts wind noise, breath pops and handling rumble₹590 (MRP ₹590)View
Hawk WSB01 Microphone Wind ShieldOutdoor wind shieldCompact wind shieldFits over the microphone head; for outdoor and on-location use₹150 (MRP ₹160)View
Hawk Microphone Reflection Shield (Silver)Home vocal recordingPortable reflection shieldAbsorbs room echo; Silver finish₹7,300 (MRP ₹8,500)View
MX 3433 Clip-Type Microphone HolderSpare mic holderClip-type microphone holderSpring-loaded jaws; for standard wired microphones₹300 (MRP ₹330)View
Sennheiser A 1031-U Remote AntennaWireless system antennaPassive omnidirectional UHF antennaFor Sennheiser evolution wireless systems; stand-mountable₹12,990 (MRP ₹13,290)View
Hawk DI 100 Active DI BoxInstrument to mixerActive DI boxUnbalanced instrument signal to balanced XLR at mic level₹1,800 (MRP ₹1,900)View

Microphone Stands & Booms: Holding the Microphone Where It Belongs

A stand is the first accessory most people buy, and the one that decides whether a session is comfortable or a constant fight. A good stand holds the microphone exactly where your mouth is, stays put when you lean in, and folds away when the session ends. Two stands in this category are in stock, and they cover the two most common setups: a foldable boom stand for podcasting and streaming, and a 2-in-1 stand that works as either a straight stand or a boom stand.

Sound X SMS-01 Pro Mic Stand: Best Boom Stand for Podcasting and Streaming

Price: ₹3,900 (MRP ₹4,034) | View the Sound X SMS-01 Pro Mic Stand on Pro Audio Video

The Sound X SMS-01 Pro is a foldable boom microphone stand for musicians, podcasters, streamers and broadcasters who need the microphone placed precisely and held there. It adjusts from 920 mm to 1525 mm in height, which covers seated podcast and interview positions through to a standing singer, and its 800 mm boom arm reaches over desks, keyboards and amplifiers so the microphone sits close to the source while the stand itself stays out of the way.

When the session ends, the stand folds down for storage in a small studio or for transport to the next venue. At ₹3,900 against an MRP of ₹4,034, it is the cheaper of the two in-stock stands here, and the right choice if you mostly record seated at a desk or standing in one place.

Key details

  • Height: Adjustable from 920 mm to 1525 mm
  • Boom arm: 800 mm, for reaching over desks and keyboards
  • Design: Foldable for storage and transport
  • Price: ₹3,900 (MRP ₹4,034)

Pros

  • Height range covers seated podcasting through to standing vocals
  • 800 mm boom arm reaches over a desk without the stand getting in the way
  • Folds down for storage or transport
  • Lower price of the two in-stock stands

Cons

  • A boom stand only; it does not convert to a straight stand

Check price and availability of the Sound X SMS-01 Pro Mic Stand at Pro Audio Video

Bespeco MS16 2-in-1 Microphone Stand: Best Versatile Stand for Studio and Rehearsal

Price: ₹5,499 (MRP ₹6,060) | View the Bespeco MS16 2-in-1 Microphone Stand on Pro Audio Video

The Bespeco MS16 is a professional microphone stand that works two ways: as a straight stand, and as a boom stand with a telescopic boom. That 2-in-1 layout covers the two setups most sessions alternate between, without owning and storing two different stands. In straight mode the microphone sits directly above the round base, the clean arrangement for a vocalist, a presenter or an announcer. Swing the telescopic boom into use and the same stand reaches over a guitar, a keyboard, a drum kit or a music stand while the upright stays clear of the performer.

At ₹5,499 against an MRP of ₹6,060, it costs ₹1,599 more than the Sound X SMS-01. Pay the difference if you need both straight and boom setups from one stand, for example in a rehearsal room or a small studio that hosts singers one day and instruments the next.

Key details

  • Modes: Straight stand or boom stand with telescopic boom
  • Base: Round base
  • Use: Rehearsal, performance or studio arrangement
  • Price: ₹5,499 (MRP ₹6,060)

Pros

  • Two stands in one: straight or telescopic boom
  • Round base suits vocalists, presenters and announcers in straight mode
  • Boom mode reaches over instruments while the upright stays clear

Cons

  • Costs more than the Sound X boom stand
  • Check stability and adjust before use, as the listing advises

Check price and availability of the Bespeco MS16 2-in-1 Microphone Stand at Pro Audio Video

Most other stands in this category are currently out of stock, including the Samson MB1 mini boom and BT4 telescoping boom stands, the Gator Frameworks tripod and round-base stands, the Bespeco MSF01, MS36NE, MS11 and MS11EVO boom stands, and the Ahuja DGN and AFS-201 stands. If you need a stand now, the two above are the ones actually available.

Shock Mounts: Keeping Vibration Out of the Recording

A shock mount suspends the microphone on elastic so that vibration travelling up the stand — footfalls, desk thumps, a bumped stand, floor rumble — is absorbed before it reaches the capsule as low-frequency noise. It matters most for condenser microphones on desks and stands, because condensers are sensitive enough to hear the room through the stand. A shock mount is not a generic accessory: most are made for one microphone model, so check compatibility before you buy.

Sennheiser MKS 4 Shock Mount: Best Shock Mount for the Sennheiser MK 4 and MK 8

Price: ₹5,990 (MRP ₹7,400) | View the Sennheiser MKS 4 Shock Mount on Pro Audio Video

The Sennheiser MKS 4 is the elastic-suspension shock mount designed for the MK 4 and MK 8 large-diaphragm studio condenser microphones. The microphone floats inside the mount on elastic suspension instead of being clamped rigidly to the stand, so footfalls, desk thumps, stand bumps and floor vibration are absorbed before they can travel up the stand and into the recording as low-frequency rumble.

Its defining detail is the open ring: unlike fully enclosed shock mounts that hold the microphone back inside a cage, the MKS 4 leaves the front open, so the microphone can be positioned close to the sound source. For vocal recording that means working close to the capsule for presence and control. At ₹5,990 against an MRP of ₹7,400, it is the only shock mount in stock in this category — the RODE SM6 shock mount with detachable pop filter, at ₹5,500, is currently out of stock.

Key details

  • Fits: Sennheiser MK 4 and MK 8 large-diaphragm studio condenser microphones
  • Suspension: Elastic suspension; microphone floats inside the mount
  • Design: Open ring, so the microphone can sit close to the sound source
  • Price: ₹5,990 (MRP ₹7,400)

Pros

  • Made by Sennheiser for the MK 4 and MK 8, so the fit is exact
  • Elastic suspension absorbs footfalls, desk thumps and floor vibration
  • Open ring lets you work close to the capsule

Cons

  • Model-specific: it fits the MK 4 and MK 8, not microphones generally
  • Only one shock mount is in stock in this category

Check price and availability of the Sennheiser MKS 4 Shock Mount at Pro Audio Video

Pop Filters: Stopping Plosive Thumps Before They Reach the Capsule

When a speaker or singer produces plosive consonants — the P, B and T sounds — a small burst of air travels with the word and strikes the microphone diaphragm as a low thump that no amount of later processing removes cleanly. A pop filter is a mesh screen that sits between the mouth and the microphone and breaks up that burst before it arrives, while letting the voice itself pass through. It is the cheapest meaningful upgrade to a vocal recording, and two are in stock here: one made for a specific microphone, and one general-purpose gooseneck filter that fits any stand.

Elgato Wave Pop Filter: Best Pop Filter for Elgato Wave Microphones

Price: ₹3,500 (MRP ₹5,250) | View the Elgato Wave Pop Filter on Pro Audio Video

The Elgato Wave Pop Filter is the purpose-built anti-plosive shield for Elgato Wave microphones. It is a dual-layer steel mesh screen that mounts directly onto the microphone body and sits between your mouth and the capsule, diffusing the burst of air that spoken consonants produce before that air can hit the diaphragm.

Elgato shapes and sizes the filter specifically for the Wave:1 and Wave:3, so instead of a generic round screen on a clamp and gooseneck, you get a fitted accessory that attaches in seconds with a magnetic attachment, stays at exactly the distance the microphone was designed around, and looks like part of the microphone rather than an addition to it. It weighs just 30 g and keeps the voice natural, with maximum audio transparency. At ₹3,500 against an MRP of ₹5,250, it is the premium pop filter in this guide — buy it if you own a Wave:1 or Wave:3.

Key details

  • Mesh: Dual-layer steel mesh diffuses air currents
  • Fits: Custom built for Elgato Wave:1 and Wave:3
  • Attachment: Magnetic attachment, snaps into place
  • Weight: 30 g
  • Price: ₹3,500 (MRP ₹5,250)

Pros

  • Fitted to the Wave:1 and Wave:3, so the distance from the capsule is exactly right
  • Dual-layer steel mesh stops pops and hisses from plosive speech
  • Magnetic attachment fits in seconds and weighs only 30 g
  • Maximum audio transparency, keeping the voice natural

Cons

  • Made for Elgato Wave microphones only, not a general-purpose filter
  • Costs more than a generic gooseneck pop filter

Check price and availability of the Elgato Wave Pop Filter at Pro Audio Video

Hawk PS03 Microphone Pop Filter: Best Budget Pop Filter

Price: ₹1,000 (MRP ₹1,200) | View the Hawk PS03 Microphone Pop Filter on Pro Audio Video

The Hawk PS03 is a microphone pop filter: a mesh screen on a flexible gooseneck with a clamp that mounts it to a microphone stand or boom arm. It does the same essential job as the Elgato filter — breaking up the burst of air from plosive consonants before it reaches the diaphragm — but as a general-purpose accessory that fits any microphone on a stand, rather than one made for a single model.

At ₹1,000 against an MRP of ₹1,200, it is the best-value pop filter in this guide, and the one to buy for podcast, streaming and vocal recording on any microphone. The Hawk PS02 pop filter, at ₹1,400, is a different model with its own clamp-and-gooseneck arrangement and is currently out of stock, as are the MX gooseneck pop filter and the Gator metal pop filter.

Key details

  • Design: Mesh pop filter on a flexible gooseneck with a clamp
  • Mounting: Clamps to a microphone stand or boom arm
  • Use: Podcast, streaming and vocal recordings
  • Price: ₹1,000 (MRP ₹1,200)

Pros

  • General-purpose: fits any microphone on a stand
  • Flexible gooseneck lets you position the screen exactly where you need it
  • Best-value pop filter in this guide at ₹1,000

Cons

  • A clamp-and-gooseneck filter, not a fitted magnetic one like the Elgato

Check price and availability of the Hawk PS03 Microphone Pop Filter at Pro Audio Video

Windscreens & Wind Shields: Taming Wind, Breath and Outdoor Noise

A pop filter sits in front of the microphone; a windscreen covers it. Foam or furry windscreens slip over the microphone head and diffuse moving air — wind outdoors, breath close to the capsule, air conditioning in a hall — before it reaches the capsule as low-frequency rumble. Three are in stock here, from ₹150 to ₹1,590, and the choice is mostly about which microphone you own and where you record.

Sennheiser MKW 4 Foam Windscreen: Best Windscreen for the Sennheiser MK 4

Price: ₹1,590 (MRP ₹2,190) | View the Sennheiser MKW 4 Foam Windscreen on Pro Audio Video

The Sennheiser MKW 4 is the foam windscreen made by Sennheiser for its MK 4 large-diaphragm condenser microphone. It slips over the microphone’s head and works on the two problems that most often spoil a voice recording outside a treated booth: plosive bursts from P and B sounds hitting the capsule, and the low rush of moving air from breath, room fans and air conditioning.

Because Sennheiser sizes it for the MK 4 body, it seats fully and stays in place, where generic foam covers tend to slide, bunch or leave part of the grille exposed. At ₹1,590 against an MRP of ₹2,190, it is the natural partner to the MKS 4 shock mount above for anyone recording with an MK 4.

Key details

  • Fits: Sennheiser MK 4 large-diaphragm condenser microphone
  • Function: Reduces plosives and breath noise
  • Fit: Sized for the MK 4 body, so it seats fully and stays in place
  • Price: ₹1,590 (MRP ₹2,190)

Pros

  • Genuine Sennheiser accessory made for the MK 4, so the fit is exact
  • Reduces plosives, breath noise and the rush of moving air
  • Stays in place instead of sliding or bunching like generic covers

Cons

  • Model-specific: made for the MK 4, not microphones generally

Check price and availability of the Sennheiser MKW 4 Foam Windscreen on Pro Audio Video

Hawk WS01 Microphone Windscreen: Best General-Purpose Foam Windscreen

Price: ₹590 (MRP ₹590) | View the Hawk WS01 Microphone Windscreen on Pro Audio Video

The Hawk WS01 is a foam windscreen that slips over a microphone head to reduce wind noise, breath pops and handling rumble in recordings and live sound. Moving air is one of the most common causes of spoiled audio: a gust outdoors, a singer breathing close to the capsule, or air conditioning in a hall can all produce low-frequency noise that masks speech and vocals. The foam diffuses that air movement before it reaches the capsule, so the recorded sound stays clearer.

The WS01 also gives the microphone head a basic layer of protection against dust and moisture during everyday use, storage and transport. At ₹590, with no discount off its MRP, it is the general-purpose windscreen to buy when you do not own the specific microphone a model-matched windscreen is made for.

Key details

  • Design: Foam windscreen that slips over a microphone head
  • Function: Cuts wind noise, breath pops and handling rumble
  • Protection: Basic protection against dust and moisture in use, storage and transport
  • Price: ₹590 (MRP ₹590)

Pros

  • General-purpose foam windscreen for live and outdoor recording
  • Reduces wind noise, breath pops and handling rumble
  • Protects the microphone head from dust and moisture

Cons

  • No discount off MRP at the current price

Check price and availability of the Hawk WS01 Microphone Windscreen at Pro Audio Video

Hawk WSB01 Microphone Wind Shield: Best Budget Wind Shield for Outdoor Recording

Price: ₹150 (MRP ₹160) | View the Hawk WSB01 Microphone Wind Shield on Pro Audio Video

The Hawk WSB01 is a compact wind shield for microphones, designed to fit over the microphone head and diffuse wind and breath blasts before they reach the capsule. Moving air that strikes a bare microphone produces low-frequency rumble that can overwhelm speech and music, and the shield softens that impact so recordings stay intelligible.

Its compact, lightweight form suits microphones that travel: it takes little space in a camera bag or microphone case and can stay fitted or be slipped on whenever a shoot, event or performance moves outdoors or into a draughty space. At ₹150 against an MRP of ₹160, it is the cheapest product in this guide — and the easiest accessory to justify buying as a spare.

Key details

  • Design: Compact wind shield that fits over the microphone head
  • Function: Diffuses wind and breath blasts before they reach the capsule
  • Portability: Compact and lightweight; fits in a camera bag or microphone case
  • Price: ₹150 (MRP ₹160)

Pros

  • Cheapest product in this guide at ₹150
  • Compact and light enough to carry everywhere and leave fitted
  • Suits outdoor and on-location recording

Cons

  • A compact shield, not a full furry windshield for strong wind

Check price and availability of the Hawk WSB01 Microphone Wind Shield at Pro Audio Video

Reflection Shields: Recording Dry Vocals in an Untreated Room

In an untreated bedroom, office or living room, a voice reaches the microphone twice: once directly, and again a fraction of a second later after bouncing off walls, ceilings and hard furniture. That second arrival is what makes home recordings sound echoey and distant. A reflection shield is a portable acoustic screen that sits behind the microphone and absorbs the room reflections that would otherwise colour the recording. It is the closest thing to a treated booth that you can fold up and put away.

Hawk Microphone Reflection Shield (Silver): Best Reflection Shield for Home Vocals and Podcasts

Price: ₹7,300 (MRP ₹8,500) | View the Hawk Microphone Reflection Shield (Silver) on Pro Audio Video

The Hawk Microphone Reflection Shield is a portable acoustic screen that sits behind a microphone and absorbs the room reflections that would otherwise colour a recording. The shield wraps around the back of the microphone and traps much of that reflected energy at the source, so the recorded voice is drier, tighter and easier to work with. This listing is for the Silver finish.

At ₹7,300 against an MRP of ₹8,500, it is the second most expensive product in this guide, after the Sennheiser remote antenna. It earns its price if you record vocals or podcasts in a room you cannot treat — a bedroom studio, a home office, a rented space — where the room sound is the main thing wrong with your recordings. If your room already sounds good, spend the money on a pop filter and a shock mount first.

Key details

  • Function: Portable acoustic screen that absorbs room echo
  • Design: Wraps around the back of the microphone
  • Finish: Silver
  • Price: ₹7,300 (MRP ₹8,500)

Pros

  • Makes home recordings drier and tighter without treating the room
  • Portable: folds away when the session ends
  • Suits vocal and podcast recording anywhere

Cons

  • Second most expensive product in this guide
  • It absorbs reflections at the microphone, it does not soundproof a room

Check price and availability of the Hawk Microphone Reflection Shield (Silver) at Pro Audio Video

Clips & Holders: The Small Fitting That Holds Everything Together

A microphone holder is the fitting that holds a handheld microphone on a microphone stand. It is a replacement and spare part as much as a first purchase: holders are the piece of a stand setup that gets lost between venues, cracked in a cable case or borrowed onto another stand, and without one a working microphone has no proper home on stage. The Aston Smart SMC microphone clip, at ₹210, is currently out of stock, so the one in-stock holder is the pick below.

MX 3433 Clip-Type Microphone Holder: Best Spare Microphone Holder

Price: ₹300 (MRP ₹330) | View the MX 3433 Clip-Type Microphone Holder on Pro Audio Video

The MX 3433 is a clip-type microphone holder for standard wired microphones, covering vocal, speech and instrument microphones. Its spring-loaded jaws grip the microphone body firmly, and its threaded base fits the stands these holders are normally used with, so fitting or replacing one takes seconds.

At ₹300 against an MRP of ₹330, it is one of the cheapest products in this guide. Buy one as a spare even if your current holder works: it is the accessory most likely to go missing on the way to a gig, and the cheapest to replace before it does.

Key details

  • Design: Clip-type microphone holder with spring-loaded jaws
  • Fits: Standard wired microphones — vocal, speech and instrument
  • Base: Threaded base for standard microphone stands
  • Price: ₹300 (MRP ₹330)

Pros

  • Spring-loaded jaws grip the microphone firmly
  • Fits or replaces in seconds on a standard stand thread
  • Cheap enough to keep as a spare

Cons

  • For standard wired microphones; check the diameter against your microphone

Check price and availability of the MX 3433 Clip-Type Microphone Holder at Pro Audio Video

Wireless Antennas & DI Boxes: Getting the Signal There Cleanly

Two accessories in this category do the unglamorous work of moving a signal without losing it. A remote antenna gets a wireless microphone system’s antenna out of a metal rack and into clear air, so the radio link stays reliable. A DI box converts an instrument’s unbalanced output into a balanced signal a mixer can take down a long cable without hum. Both are specialist buys — you either need one or you do not — and both are in stock here.

Sennheiser A 1031-U Remote Antenna: Best Remote Antenna for Sennheiser Wireless Systems

Price: ₹12,990 (MRP ₹13,290) | View the Sennheiser A 1031-U Remote Antenna on Pro Audio Video

The Sennheiser A 1031-U is a passive, omnidirectional UHF antenna for Sennheiser wireless microphone and monitoring systems. It can be used for both receiving and transmitting, covers a wide UHF frequency range, and is designed to be mounted on a stand so the antenna can be positioned away from a receiver rack for better coverage.

Remote antennas solve a common problem in racked wireless systems: antennas left inside or behind a metal rack lose performance. Moving an omnidirectional antenna into a clear position, on a stand or mounting plate, improves the reliability of the radio link for the connected receivers or transmitters. At ₹12,990 against an MRP of ₹13,290, it is the most expensive product in this guide, and a specialist purchase for installed wireless systems — the Lectrosonics ALP690 active antenna, at ₹1,40,000, is currently out of stock.

Key details

  • Type: Passive, omnidirectional UHF antenna
  • Use: Receiving and transmitting for Sennheiser evolution wireless systems
  • Mounting: Designed to be mounted on a stand, away from the receiver rack
  • Price: ₹12,990 (MRP ₹13,290)

Pros

  • Moves the antenna out of a metal rack into clear air for a more reliable radio link
  • Works for both receiving and transmitting
  • Omnidirectional, so it does not need aiming

Cons

  • Most expensive product in this guide
  • Only useful if you run a Sennheiser wireless system

Check price and availability of the Sennheiser A 1031-U Remote Antenna at Pro Audio Video

Hawk DI 100 Active DI Box: Best DI Box for Instruments

Price: ₹1,800 (MRP ₹1,900) | View the Hawk DI 100 Active DI Box on Pro Audio Video

The Hawk DI 100 is an active direct injection (DI) box for connecting instruments to a mixing console or PA system. It takes the unbalanced, high-impedance output of an instrument such as a guitar, bass or keyboard and converts it into a balanced XLR signal at microphone level. That conversion is what allows an instrument to travel down a long cable run or a stage snake to the mixer without picking up hum and interference along the way.

It uses active DI circuitry with a buffered input stage, and is designed for guitars, bass, keyboards and acoustic instrument pickups, for live stage, studio and house-of-worship use. At ₹1,800 against an MRP of ₹1,900, it is a small purchase that solves a real problem the first time an instrument has to reach a mixer across a stage.

Key details

  • Function: Converts unbalanced instrument output to a balanced XLR signal at microphone level
  • Circuitry: Active DI circuitry with a buffered input stage
  • For: Guitars, bass, keyboards and acoustic instrument pickups
  • Price: ₹1,800 (MRP ₹1,900)

Pros

  • Clean, hum-free instrument connection over long cable runs
  • Balanced XLR output at microphone level suits any mixer
  • Good value at ₹1,800

Cons

  • An active DI box; it needs power, unlike a passive DI box

Check price and availability of the Hawk DI 100 Active DI Box at Pro Audio Video

Matching Accessories to Your Microphone Type

Accessories are not one-size-fits-all, and the right combination depends on the microphone you own. Buy for your microphone, not for the accessory list.

Dynamic microphones (podcasting, live vocals, streaming)

Dynamic microphones are rugged and forgiving, and they need the least help. A stand, a pop filter and a windscreen are the core kit: the Sound X SMS-01 stand at ₹3,900, the Hawk PS03 pop filter at ₹1,000 and the Hawk WS01 windscreen at ₹590 come to ₹5,490. Add the MX 3433 holder at ₹300 as a spare, and the Hawk WSB01 wind shield at ₹150 if you record outdoors. A shock mount is optional for a dynamic microphone on a stand — most dynamic microphones are supplied with a clip and are far less sensitive to stand vibration than condensers.

Condenser microphones (studio vocals, voiceover, recording)

Condenser microphones are sensitive, and they repay the full accessory set. A shock mount is close to essential: the Sennheiser MKS 4 at ₹5,990 for the MK 4 and MK 8, and a windscreen matched to your model, such as the MKW 4 at ₹1,590 for the MK 4. Add a pop filter — the Hawk PS03 at ₹1,000 fits any stand — and a reflection shield such as the Hawk shield at ₹7,300 if you record in an untreated room. Check compatibility first: shock mounts and windscreens are often model-specific, and a mount made for one microphone will not fit another.

Lavalier and wireless microphones (presenters, video, events)

Lavalier microphones need small windscreens for outdoor use and, for the wireless system behind them, a reliable antenna position. The Hawk WSB01 wind shield at ₹150 is a cheap, compact cover for on-location work. For a Sennheiser evolution wireless system in a rack, the A 1031-U remote antenna at ₹12,990 gets the antenna out of the rack and into clear air. Note that a lavalier microphone itself is not an accessory: the Sennheiser MKE 1-4 lavalier microphone in this category is a microphone, not an accessory, and it is currently out of stock.

Shotgun microphones and boom poles (film, video, field recording)

Shotgun microphones live on boom poles, and the poles in this category are the expensive end of the range. The RODE Boompole Pro carbon fibre boom pole at ₹23,500, the Ambient QP5130-CCM carbon-fibre boom pole with coiled cable at ₹1,10,000 and the E-Image carbon fibre boom poles are all currently out of stock, as is the RODE Boompole aluminium pole at ₹11,490. If your setup depends on a boom pole, check availability before committing to the rest of the kit — and budget for a wind shield such as the Hawk WSB01 at ₹150, because a shotgun microphone outdoors without wind protection is unusable.

If these accessories are part of a video or streaming rig, see our guide to the best professional video equipment in India for the cameras, capture cards and switchers that pair with these microphone accessories.

Buying Guide: How to Choose Microphone Accessories

Microphone accessories only work as a system with the microphone they serve. Start from your microphone and your room, not from a shopping list.

Start with the microphone you own

Check the model first. Shock mounts and windscreens are often model-specific — the Sennheiser MKS 4 fits the MK 4 and MK 8, the MKW 4 fits the MK 4, and the Elgato Wave Pop Filter fits the Wave:1 and Wave:3. Most stands use standard threads, so a stand or a clip such as the MX 3433 is a safer generic buy. If you are not sure an accessory fits your microphone, check the product page before ordering.

Buy in priority order

For most people the order is: a stand, a pop filter, a windscreen, then a shock mount, then a reflection shield. The stand holds the microphone; the pop filter stops plosive thumps; the windscreen tames wind and breath noise; the shock mount removes vibration; the reflection shield dries up room echo. A podcast starter set — the Bespeco MS16 stand at ₹5,499, the Hawk PS03 pop filter at ₹1,000 and the Hawk WS01 windscreen at ₹590 — costs ₹7,089. A budget desk set — the Sound X SMS-01 stand at ₹3,900, the Hawk PS03 at ₹1,000 and the Hawk WS01 at ₹590 — costs ₹5,490.

Pop filter or windscreen — or both?

A pop filter is a mesh screen in front of the mic for vocals. A foam or furry windscreen covers the mic to reduce wind and breath noise. Indoors, for vocals and podcasting, a pop filter does most of the work. Outdoors, or close to the microphone, a windscreen matters more. Many recordings use both: a windscreen on the microphone and a pop filter in front of it. At these prices — the Hawk PS03 at ₹1,000 and the Hawk WS01 at ₹590 — owning both is cheap.

Will a boom arm hold my microphone?

Check the weight capacity on the product page against your microphone’s weight. A heavy condenser microphone on a light boom arm will sag; a light microphone on a heavy stand is fine. The two stands in this guide are full-size floor stands, not desk boom arms, so weight is less of a concern — but the same rule applies to any arm you add later.

Cables and connectors

For desk setups, 3 to 5 metres of XLR cable is enough. For stages, 6 to 10 metres or more. Keep the cable run as short as the setup allows, and use a DI box such as the Hawk DI 100 at ₹1,800 when an instrument has to travel a long way to the mixer. This category does not currently stock XLR cables, so buy the cable with the microphone or the mixer rather than expecting to find it here.

What is out of stock — and what to do about it

Thirty-five of the 51 products in this category are out of stock, including most of the stands, the RODE SM6 shock mount, the Gator and MX pop filters, and all of the boom poles. If the accessory you want is out of stock, the in-stock alternative in the same type is usually the honest substitute: the Hawk PS03 instead of the Gator metal pop filter, the Sound X or Bespeco stand instead of the Samson or Gator stands, the Hawk WS01 instead of a model-specific windscreen you cannot buy. Do not buy a different type of accessory to fill the gap — a windscreen does not replace a shock mount.

Budget planning

All 12 featured accessories together cost ₹44,609, but nobody needs all 12: the Sennheiser antenna alone is ₹12,990 and only belongs in a wireless rack. A realistic podcast or streaming setup costs ₹5,490 to ₹7,089. A condenser vocal setup — the MKS 4 shock mount at ₹5,990, the MKW 4 windscreen at ₹1,590, the Hawk PS03 at ₹1,000 and the Sound X stand at ₹3,900 — costs ₹12,480, before the microphone itself. Add the Hawk reflection shield at ₹7,300 only if your room echoes.

Frequently Asked Questions

Do I need a shock mount?

A shock mount helps reduce vibration and handling noise, especially for condenser microphones on desks and stands.

What is the difference between a pop filter and a windscreen?

A pop filter is a mesh screen in front of the mic for vocals. A foam or furry windscreen covers the mic to reduce wind and breath noise.

Will this boom arm hold my microphone?

Check the weight capacity on the product page against your microphone's weight.

Do these accessories fit all microphones?

Most stands use standard threads. Shock mounts and windshields are often model-specific, so check compatibility.

Are these accessories genuine?

Yes. All products are genuine with GST invoice.

Final Verdict: Which Microphone Accessories Should You Buy?

For most podcasters and streamers, the Bespeco MS16 stand at ₹5,499, the Hawk PS03 pop filter at ₹1,000 and the Hawk WS01 windscreen at ₹590 are the right first three purchases, for ₹7,089 in total. On a tighter budget, swap the stand for the Sound X SMS-01 at ₹3,900 and the set costs ₹5,490. If you record with a Sennheiser MK 4, add the MKS 4 shock mount at ₹5,990 and the MKW 4 windscreen at ₹1,590, both made for that microphone. If you own an Elgato Wave microphone, the Wave Pop Filter at ₹3,500 is the fitted filter to buy. If your room echoes, add the Hawk Reflection Shield at ₹7,300. If you record outdoors, the Hawk WSB01 wind shield at ₹150 is the cheapest useful accessory in this guide. Keep the MX 3433 holder at ₹300 as a spare, and buy the Sennheiser A 1031-U antenna at ₹12,990 and the Hawk DI 100 at ₹1,800 only if your wireless system or your instruments need them. Buy the stand, pop filter and windscreen first, add the rest once the core setup works, and check the live product page for the current price before ordering.

Prices above were checked live on 22 November 2026 and may change; the product page always shows the current price.

Not sure what to buy?

Tell us about your room, your budget and what you listen to. Our team will suggest a setup that fits, or put together a quote for a complete system.

Back to top
Shop all categories
Shop all brands
Popular searches