
Ahuja APA-480 Installation Amplifier
SKU AHUJA-APA-480
Original price was: ₹36,999.₹35,000Current price is: ₹35,000. Save ₹1,999 (5%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
Ahuja APA-480 installation PA power amplifier with 600 W RMS, XLR and unbalanced line inputs, 4 ohm, 8 ohm, 70 V and 100 V outputs and rack mounting.
Currently out of stock
Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

Product highlights
- Product TypeInstallation PA Power Amplifier
- Power Output600 W RMS, 750 W Maximum
- Inputs1 x 200 mV Unbalanced Line, 2 x 1 V Balanced Line (XLR)
- Frequency Response50 - 15,000 Hz, plus or minus 3 dB
- Signal to Noise Ratio60 dB
- Tone Controlsplus or minus 10 dB at 100 Hz and 10 kHz
Description
Ahuja APA-480 Installation Amplifier – 600 W RMS for Public Address That Cannot Stop
The Ahuja APA-480 is an installation PA power amplifier rated at 600 W RMS, built to sit in a rack behind a mixer or processor and drive a public address system day after day. It accepts one 200 mV unbalanced line input and two 1 V balanced line inputs on XLR connectors, includes a priority input so announcements can take precedence over background music, and can transfer instantly to 24 V DC battery power if the mains fails.
That combination – real power, balanced inputs, priority handling and battery changeover – is aimed squarely at schools, places of worship, hotels, offices, factories and halls in India, where an announcement system is expected to work during a power cut, not just between them.
Key features
- 600 W RMS output, 750 W maximum
- Two 1 V balanced line inputs on XLR, one 200 mV unbalanced line input
- Priority input system for announcements over background music
- Speaker outputs for 4 ohm, 8 ohm, 70 V and 100 V systems
- Ground lift switch to reduce hum from ground loops
- Loop-through output to daisy-chain further amplifiers
- Instant changeover to 24 V DC car battery power on AC failure
- Tone controls, plus or minus 10 dB at 100 Hz and 10 kHz
- 19-inch rack mounting with resettable circuit breaker protection
Low impedance and line systems, in one amplifier
Short runs to a few nearby speakers suit direct 4 ohm or 8 ohm outputs. Long runs to many speakers spread across a building do not: cable losses and load matching become a problem. Constant-voltage 70 V and 100 V outputs solve that by letting each speaker tap a small amount of power through its own transformer, so a corridor, a floor or a whole campus can be covered from one amplifier. The APA-480 offers both approaches, so the same unit fits a single hall or a distributed installation.
Why balanced inputs and ground lift matter
In a large building, the mixer and amplifier may sit far apart, and long unbalanced cable runs collect hum and interference along the way. Balanced XLR inputs reject much of that noise, and the ground lift switch breaks the hum loop that appears when equipment is powered from different points. These are unglamorous features that decide whether a system sounds clean on its first day and its five hundredth.
Installation notes
Mount the amplifier in a ventilated rack with clear space around its vents, match every speaker load to the correct output terminal, and keep the total connected load within the rated power. Route line cables away from mains cabling, and switch the unit off before changing speaker connections. At 32.2 kg, plan the rack position and support accordingly.
For institutions that need announcements and music to keep going through anything, the APA-480 is a heavy, serious and well-proven answer.
Additional Information
Specifications
| Product Type | Installation PA Power Amplifier |
|---|---|
| Power Output | 600 W RMS, 750 W Maximum |
| Inputs | 1 x 200 mV Unbalanced Line, 2 x 1 V Balanced Line (XLR) |
| Frequency Response | 50 - 15,000 Hz, plus or minus 3 dB |
| Signal to Noise Ratio | 60 dB |
| Tone Controls | plus or minus 10 dB at 100 Hz and 10 kHz |
| Speaker Outputs | 4 Ohms, 8 Ohms, 70 V, 100 V |
| Priority Input | Yes |
| Ground Lift | Yes |
| Loop-Through Output | Yes |
| Power Supply | AC 220 - 240 V, 50/60 Hz; DC 24 V Car Battery Changeover |
| Power Consumption | AC 1200 VA, DC 15 A |
| Form Factor | 19-inch Rack Mount |
| Dimensions | 485 x 142 x 510 mm (W x H x D) |
| Weight | 32.2 kg |
| Brand | Ahuja |
| Model / SKU | AHUJA-APA-480 |
| Category | Amplifier |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The Ahuja APA-480 Installation Amplifier comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.






