
BlueRigger HDMI CL3 BL 35FT Cable
SKU BLUERIGGER-HDMI-CL3-BL-35FT
Original price was: ₹6,149.₹5,299Current price is: ₹5,299. Save ₹850 (14%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
BlueRigger HDMI CL3 BL 35FT cable provides an HDMI connection over the stated 35FT length for a suitably matched source and display.
- HDMI source-to-display connection.
- 35FT supplied length.
- CL3 BL listing reference.
- Check exact cable-series and endpoint format support.
In stock· Dispatched the same day

Product highlights
- Length35 ft (approx. 10.7 m)
- Jacket ratingCL3 rated for in-wall installation
- Bandwidth10.2 Gbps / 340 MHz, as stated by BlueRigger
- CategoryCategory 2 Certified High Speed HDMI cable
- Video support4K at 30 Hz, Ultra HD, 3D, 1080p
- Audio supportDolby TrueHD and DTS-HD Master Audio
Description
BlueRigger HDMI CL3 35FT Cable
The BlueRigger HDMI CL3 35FT cable is a long HDMI lead built for permanent installation: 35 feet of cable (about 10.7 metres) with a CL3-rated jacket, which is the rating that covers running the cable inside walls. That combination is what this product is for. A projector at the back of a room, a television on one wall with the equipment rack on another, a display in a second area: these are runs that cannot be improvised with a short lead draped across the floor, and they are runs you only want to make once.
BlueRigger describes this CL3 cable family as a Category 2 Certified High Speed HDMI cable rated at 10.2 Gbps / 340 MHz, supporting 4K at 30 Hz, Ultra HD, 3D and 1080p, with HDMI Ethernet and Audio Return Channel. Those are the manufacturer’s stated figures for this cable, and they define its role honestly: it is a high-speed cable of its generation for HD and 4K-at-30 Hz systems over a long in-wall run, not an Ultra High Speed cable for 4K at 120 Hz or 8K sources.
Key features
- 35 ft length (approx. 10.7 m) for long projector and equipment-rack runs
- CL3-rated jacket for in-wall installation
- High Speed HDMI, Category 2 Certified, rated 10.2 Gbps / 340 MHz by BlueRigger
- Supports 4K at 30 Hz, Ultra HD, 3D and 1080p
- HDMI Ethernet Channel and Audio Return Channel support
- Supports Dolby TrueHD and DTS-HD Master Audio
- Fully shielded, heavy-duty cable with a soft PVC jacket
- Full metal jacket connectors with corrosion-resistant plating
The CL3 rating
CL3 is a fire-safety rating for the cable jacket, assessed for use inside walls in residential and commercial runs. It is separate from signal performance: a cable can be fast and still not be the cable you may bury in a wall, and a CL3 jacket does not by itself say anything about bandwidth. This cable carries both parts of the specification openly: the CL3 jacket for the installation, and BlueRigger’s stated 10.2 Gbps high-speed rating for the signal. For any in-wall project, the installer should still confirm the jacket marking on the supplied cable and the local requirements for the building before the run is closed up, and CL3 is not a plenum rating, so air-handling spaces are a different specification.
What 35 feet is for
Length is the feature. Thirty-five feet reaches from a rack or a media cabinet to a ceiling-mounted projector, across a hall or training room to a wall display, or from a stage-side source to a screen, with the cable hidden in the wall or conduit instead of taped across a walkway. Long copper HDMI runs are the demanding end of the format, which is why the sensible workflow is to test the complete chain, at the resolution and refresh rate you intend to use, with the actual source and display, before the cable disappears into the wall. Within its stated support, 4K at 30 Hz and 1080p at higher refresh, that test is what turns a planned run into a known one.
Sound and the return channel
HDMI carries the audio with the picture, and this cable supports the lossless formats of its class, Dolby TrueHD and DTS-HD Master Audio, for Blu-ray and media-player sources feeding an AV receiver. The Audio Return Channel lets a television send its own audio, from its tuner or built-in apps, back along the same cable to a receiver or soundbar, and the Ethernet Channel covers the HDMI networking function where connected equipment uses it. Both depend on the devices at each end supporting and enabling them.
Installation notes
Plan the route before ordering the length: measure along walls and ceiling paths, not across the room, and allow slack at both ends for the equipment to be pulled out for servicing. Avoid tight bends, crushed sections and strain on the connectors, and support long horizontal runs rather than letting the cable hang from its plugs. Connect source output to display input, select the input, and run real content at the intended settings as the final check. If a future upgrade to 4K at 120 Hz or 8K is planned for the same room, that is a different cable category and should be cabled as its own decision while the walls are open.
The listing is for the single 35 ft cable in black. Resolution, refresh rate and audio performance are properties of the whole chain, and every source, intermediate device and display in it must support the mode selected.
Additional Information
Specifications
| Length | 35 ft (approx. 10.7 m) |
|---|---|
| Jacket rating | CL3 rated for in-wall installation |
| Bandwidth | 10.2 Gbps / 340 MHz, as stated by BlueRigger |
| Category | Category 2 Certified High Speed HDMI cable |
| Video support | 4K at 30 Hz, Ultra HD, 3D, 1080p |
| Audio support | Dolby TrueHD and DTS-HD Master Audio |
| HDMI features | Ethernet Channel and Audio Return Channel |
| Construction | Fully shielded heavy-duty cable with soft PVC jacket |
| Connectors | Full metal jacket connectors |
| Colour | Black |
| Brand | BlueRigger |
| Model / SKU | BLUERIGGER-HDMI-CL3-BL-35FT |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The BlueRigger HDMI CL3 BL 35FT Cable comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.









