Bose POWERSPACE P21000A 2 x 1000W Power Amplifier

Bose POWERSPACE P21000A 2 x 1000W Power Amplifier

The Bose PowerSpace P21000A is built for installed sound systems in venues, offices, retail and hospitality spaces. Key specifications include output power 2 x 1000W (THD+N < 0.04%, 1kHz, 4-8 ohm, 70/100V); I-Share mode 1 x 2000W; outputs Load-independent 4-8 ohm / 70V / 100V per channel; digital input AmpLink 8-channel (RJ-45) with thru. This listing covers the exact model named above – check the specification table before ordering if you are matching it to an existing system or replacing a unit.

Why Choose Bose PowerSpace P21000A?

The Bose PowerSpace P21000A is chosen for dependable performance in its class, with the specifications and connections listed on this page.

Every figure in the specification table is taken from the manufacturer’s published data for the Bose PowerSpace P21000A, so what you plan around is what the product is rated to do. Where a rating depends on conditions (room size, load, programme type), plan with a margin rather than at the limit.

Key Features

• 2 x 1000W load-independent outputs for 4-8 ohm, 70V or 100V systems
• I-Share mode combines channels for a single 2000W output
• AmpLink digital input carries 8 channels over one Cat 5e cable
• Auto-standby and integrated DSP-free, install-ready 1U design
• Designed for Bose Professional commercial sound systems

Best Suited For

The Bose PowerSpace P21000A suits buyers who need exactly this model and specification – for a new setup, an expansion of an existing system, or a like-for-like replacement. If you are unsure about compatibility (impedance, line voltage, fit or capacity), check the table below or ask us before ordering.

For larger spaces or higher output than the Bose PowerSpace P21000A offers, consider stepping up within the same range rather than running a smaller unit at its limit.

Setup and Connection Guide

Rack or shelf mount with ventilation clearance, wire speakers to the correct outputs (mind total load impedance), set input levels conservatively, and test at low volume before use.

Keep the Bose PowerSpace P21000A clean with a dry cloth, protect it from moisture beyond its rating, and keep ventilation paths clear in daily use. Retain the invoice and box for any future service needs.

Before ordering the Bose PowerSpace P21000A, measure the space and check the connections it needs against the specifications above – a few minutes of planning avoids most surprises later. If the Bose PowerSpace P21000A is replacing an older unit, compare mounting, load and capacity figures one by one rather than assuming they carry over from the old model.

Frequently Asked Questions

Is the Bose PowerSpace P21000A genuine and brand new?

Yes – this is a brand-new, sealed unit of the Bose PowerSpace P21000A supplied with GST invoice. Box contents are listed in the specifications table.

What are the key specifications of the Bose PowerSpace P21000A?

Output power 2 x 1000w (thd+n < 0.04%, 1khz, 4-8 ohm, 70/100v); i-share mode 1 x 2000w; outputs load-independent 4-8 ohm / 70v / 100v per channel; digital input amplink 8-channel (rj-45) with thru. The full manufacturer specification is in the Technical Specifications table below.

Full listing reference: Bose PowerSpace P21000A listing.

Technical Specifications

Explore Related Products

Building a complete setup? Explore the Bose Music Amplifier option as well.