RODE SM6 Shock Mount with Detachable Pop Filter

RODE SM6 Shock Mount with Detachable Pop Filter

The RODE SM6 is a studio-grade suspension shock mount for RODE large-diaphragm condenser microphones, combining vibration isolation and plosive control in a single unit. The microphone hangs in a suspended cradle that absorbs knocks, bumps and stand-borne rumble before they can reach the capsule, while the detachable pop filter sits on a telescopic arm in front of the microphone to diffuse the bursts of air behind hard consonants. It is the mount supplied with RODE’s NT1 microphone kits, and it is sold here on its own for studios that need a replacement, a second mount, or a mount for another compatible large-diaphragm condenser.

Why Choose RODE SM6?

Studios choose the RODE SM6 because it solves two recording problems with one purchase and keeps both solutions aligned. A separate pop filter clamped to a stand drifts out of position and needs constant adjustment, but the SM6’s filter is carried by the mount itself on a telescopic arm with two axes of adjustment, so it stays exactly where the voice needs it, session after session. The suspension cradle isolates the microphone from the floor and desk vibrations that travel up a stand, which is the difference between a clean vocal take and one spoiled by a footstep or a bumped desk. When the session moves from vocals to an acoustic instrument or a room source, the pop filter detaches completely, leaving the suspension to keep working on its own. The mount is built to studio standards and fits the body size of RODE’s large-diaphragm studio condensers.

Key Features

• Suspension shock mounting: cradle isolation that keeps rumble, knocks and stand vibration out of recordings.
• Detachable pop filter: removable pop shield on a telescopic arm, with two axes of adjustment for exact positioning.
• Single-unit design: mount and filter stay aligned, with no separate clamp to drift or re-adjust.
• Built for RODE studio condensers: fits the NT1-A, NT2-A, NT1000, NT2000, NTK and K2 large-diaphragm models.
• Standard stand fitting: mounts to mic stands and boom arms, with an included 3/8-inch adapter for European-thread stands.

Best Suited For

The RODE SM6 suits home and commercial studios recording vocals with a compatible RODE condenser, owners of an NT1-family microphone whose original mount is worn or missing, podcasters and voice-over artists upgrading from a rigid clip to proper suspension, and engineers who record both vocals and instruments and need a pop filter that can be removed in seconds. It is an accessory, not a microphone, so it only makes sense alongside a compatible microphone and a stand. Buyers should check their microphone against the compatibility list before ordering, since the cradle is sized for RODE’s large-diaphragm condenser bodies and will not suit small pencil microphones or dynamic broadcast microphones.

Setup and Connection Guide

Screw the base of the mount onto a microphone stand or boom arm, using the included 3/8-inch adapter where the stand thread requires it. Open the cradle, seat the compatible microphone in the central ring, and secure it with the captive threaded ring nut, taking care not to overtighten. Extend the telescopic arm and position the pop filter roughly 5 to 15 cm in front of the capsule, adjusting its two axes so the filter sits squarely between the performer and the microphone. For vocal sessions, keep the filter in place; for instruments or room capture, detach it and let the suspension work alone. Check that elastic bands are evenly tensioned and that the microphone hangs centred in the cradle before recording.

Frequently Asked Questions

Which microphones fit the RODE SM6?

The SM6 is sized for RODE large-diaphragm studio condenser microphones, including the NT1-A, NT2-A, NT1000, NT2000, NTK and K2. It is also the mount supplied with NT1 microphone kits. Check your microphone’s body size against this list before ordering.

Does this mount include a microphone?

No. The SM6 is a shock mount and pop filter only. The microphone, stand and cables are separate purchases.

Can the pop filter be removed from the RODE SM6?

Yes. The pop shield is detachable and mounted on a telescopic arm with two axes of adjustment, so it can be positioned precisely for vocals and removed entirely for instrument or room recording.

Technical Specifications

Explore Related Products

For a RODE microphone with both XLR and USB connectivity, also explore the RODE PodMic USB.