Bespeco LPS100 Adjustable Laptop And Projector Stand

Bespeco LPS100 Adjustable Laptop And Projector Stand

The Bespeco LPS100 is a steel stand that puts a laptop or a projector at a working height and angle, with a smaller side shelf alongside for the accessory that always needs somewhere to go — an audio interface, a media player, a remote, a mouse. Bespeco makes it in black-painted steel, adjustable in both height and tilt, with a main platform of 40 x 30 cm, a side shelf of 25 x 20 cm, and a manufacturer reference load capacity of 15 kg. It weighs 3.9 kg, light enough to move between rooms and venues, heavy enough to feel planted when it is set up.

Stands of this type solve a positioning problem rather than an equipment problem. A projector needs to sit level at the height of the screen’s centre, away from the table the audience is using. A performing musician’s laptop needs to be reachable, readable and clear of drinks and cables on the floor. A presenter needs both. The LPS100’s two-level layout is designed for exactly those arrangements.

Key features

• Steel construction with black painted finish
• Height adjustable from 77 cm to 121 cm
• Main platform of 40 x 30 cm for a laptop or projector
• Side shelf of 25 x 20 cm for an accessory device
• Platform tilt adjustment for positioning and projection angle
• Manufacturer reference load capacity of 15 kg
• Perforated main platform with raised edges

The two platforms

The main board’s 40 x 30 cm area takes typical laptops and most home and office projectors with room for air to circulate. Its perforated surface matters more than it looks: laptops and projectors both exhaust heat through their bases, and a pierced platform lets that air move instead of trapping it against a solid sheet. Raised edges help locate the device and resist it sliding when the platform is tilted. The side shelf, at 25 x 20 cm, is sized for the second item in the setup — the interface beside the DJ laptop, the playback device beside the projector, the notebook beside the presenter — keeping it at the same working height instead of on the floor or a chair.

Height, tilt and stability

The 77 to 121 cm height range covers seated desk-level work through to standing presentation and performance positions. Tilt adjustment lets a projector be aimed at its screen and a laptop screen be angled towards its user. Both adjustments interact with stability, and the 15 kg figure should be read properly: it is a reference capacity for a correctly set-up stand, not a promise that any load is safe at any angle. Keep the equipment’s footprint inside the platform, its centre of gravity over the stand, and check the locks after every adjustment, especially before tilting a loaded platform.

Setting up

Place the stand on a firm, level floor, set the height before loading it, and confirm every locking point is secured. Load the main platform first, then the side shelf, and route cables down the stand with enough slack that adjusting the height later does not pull on a connector. Leave ventilation openings on the equipment unobstructed, and recheck stability after moving the stand, since floors change from room to room.

For presenters, performers, DJs and home-cinema users who need equipment held at the right height with a shelf for the second device, the LPS100 covers the brief in steel, in one stand, without improvising with furniture.