JBL STAGE 260CDT DUAL TWEETER 6.5-INCH IN-CEILING SPEAKER (EACH)

JBL Stage 260CDT Dual Tweeter In-Ceiling Speaker

The JBL Stage 260CDT is a 2-way in-ceiling loudspeaker that plays full stereo sound from a single ceiling location. Where a normal in-ceiling speaker plays one channel, the JBL Stage 260CDT carries two 3/4-inch aluminium dome tweeters and a dual voice coil 6.5-inch woofer, so the left and right channels of a stereo recording both come out of one discreet round grille. It is the practical answer for hallways, bathrooms, kitchens and small rooms where cutting two speaker holes is impossible or unwanted, and for multi-room systems where one clean ceiling point per zone keeps the installation simple. For an independent Indian listing with full specifications, see AVShack’s page for this model.

Why Choose JBL Stage 260CDT?

Most in-ceiling speakers force a choice: one speaker per channel, which means two holes, two cable runs and two grilles in the ceiling. This speaker removes that compromise. Its twin tweeters sit on a single stereo faceplate and deliver the left and right high frequencies separately, while the dual voice coil woofer sums the left and right midrange and bass into one driver. The result is genuine stereo imaging from one mounting point, with the same Stage 2 architectural engineering found across JBL’s in-ceiling range. A zero-bezel magnetic grille finishes the job: once fitted and painted to match the ceiling, the speaker is heard and not seen.

Key Features

• True stereo from one speaker: Dual 3/4-inch aluminium dome tweeters and a dual voice coil 6.5-inch woofer reproduce both stereo channels from a single ceiling cutout.
• Acoustic lens and HDI waveguide: Each tweeter uses an acoustic lens with a High-Definition Imaging waveguide for smooth, accurate highs on and off axis.
• Discreet zero-bezel grille: The included metal grille attaches magnetically, sits almost flush with the ceiling and can be painted to blend in completely.
• XL-2 installation system: The mounting system grips ceilings up to 2 inches thick and keeps vibration to a minimum, so the speaker stays solid and clean-sounding.
• Dual stereo inputs: Two sets of nickel-plated spring-loaded terminals accept the left and right outputs of a stereo amplifier or receiver, with bare wire, pin connectors or banana plugs.
• Dynamic, detailed crossover: Premium air-core inductors and mylar-capacitor crossover components keep the sound dynamic and clear at every listening level.

Best Suited For

The JBL Stage 260CDT suits anyone who wants stereo sound without two visible speakers. It fits hallways, bathrooms, kitchens, dressing rooms and small bedrooms where a single ceiling point is all that is available. It also suits multi-room audio zones, where one speaker per room keeps wiring and ceiling work to a minimum, and retrofit jobs where cutting a second hole would mean patching, painting or disturbing an existing ceiling. Because it plays both channels, it is also the right choice for mono-look installations in shops, clinics and offices that still want proper stereo music.

Setup and Connection Guide

Installation starts with a round ceiling cutout 8 inches across, with at least 4 inches of clear depth behind the ceiling and enough room around the hole for the XL-2 locking mechanism to engage. Run two speaker cables to the location, one for the left channel and one for the right, from a stereo amplifier or receiver rated between 20 and 75 watts RMS per channel into 8 ohms. Connect the left output to one set of nickel-plated spring terminals and the right output to the other, keeping polarity consistent on both. Push the speaker into the cutout, tighten the XL-2 clamps until the unit sits firm against the ceiling, then press the magnetic grille into place. Paint the grille before fitting if a perfect ceiling match is wanted.

Is the JBL Stage 260CDT sold as one speaker or as a pair?

It is sold as a single speaker (each). One unit plays both the left and right channels, so a single unit gives stereo sound in a room. Buy one per room or zone, not one pair per room.

How is the JBL Stage 260CDT different from the JBL Stage 260C?

The Stage 260C is a conventional single-channel in-ceiling speaker with one tweeter: it plays either the left or the right channel, so stereo needs two of them. The 260CDT has two tweeters and a dual voice coil woofer, so it plays both channels from one location. Choose the 260C when two ceiling points are available and a wider stereo spread is wanted; choose the 260CDT when only one ceiling point is possible.

Does the JBL Stage 260CDT need a special amplifier?

No. Any stereo amplifier or receiver rated 20 to 75 watts RMS per channel into 8 ohms will drive it. The only requirement is that the amplifier has separate left and right speaker outputs, since both channels connect to the one speaker through its two terminal sets.

Technical Specifications

Explore Related Products

For a conventional single-channel ceiling speaker in the same Stage 2 family, see the JBL Stage 260C In-Ceiling Speaker at Pro Audio Video.