Monitor Audio Bronze 200 Floorstanding Speakers (Pair)

Monitor Audio Bronze 200 Floorstanding Speakers (Pair)

The Monitor Audio Bronze 200 in this listing is the sixth-generation (6G) model: a slim, 2.5-way floorstanding speaker supplied as a pair for stereo music and home cinema front channels. Two 5.5-inch C-CAM mid-bass drivers work with a 25 mm C-CAM Gold Dome tweeter fitted with Monitor Audio’s Uniform Dispersion waveguide. The narrow cabinet suits real living rooms where a wide tower would dominate, while the floorstanding format still delivers the bass extension, scale and output that a standmount speaker of similar width cannot match.

Key features

• 2.5-way design: Twin 5.5-inch C-CAM mid-bass drivers with crossover points at 700 Hz and 2,400 Hz for controlled bass and clear midrange.
• C-CAM Gold Dome tweeter: 25 mm tweeter with Uniform Dispersion waveguide for lifelike, evenly spread high frequencies.
• 88 dB sensitivity: An easy load with 8 ohm nominal impedance and recommended amplification of 40 to 120 watts.
• Dual HiVe II ports: Bass reflex alignment with Monitor Audio’s port system, tuned for positioning flexibility near walls.
• In-room response to 35 Hz: Manufacturer-rated frequency response of 35 to 30,000 Hz in room, 45 to 25,000 Hz free field, at minus 6 dB.
• Bi-wire terminals: Gold-plated bi-wire binding posts with pureflow silver-plated oxygen-free copper internal cabling.
• Slim cabinet, stable feet: Steel outrigger feet with spikes for carpet and rubber feet for hard floors.
• Atmos-ready system design: Can be combined with Bronze AMS Dolby Atmos enabled speakers placed on top for height channels.

Driver and cabinet engineering

C-CAM is a ceramic-coated aluminium and magnesium alloy, chosen because it is light and rigid in the sizes used for both the mid-bass cones and the tweeter dome. The 6G mid-bass drivers use updated cone geometry and Damped Concentric Mode technology, which aims to keep the cone moving as a unit and push break-up effects out of the working range. The result the design targets is a fuller low end with a clean midrange, so vocals and dialogue stay intelligible even when bass-heavy material is playing. The hexagonal-pattern grille is acoustically transparent and attaches magnetically for a clean front baffle.

Placement and amplification

With a maximum output of 112 dBA per pair and power handling of 120 watts RMS, the Bronze 200 covers medium and larger living rooms without strain, while the 4.4 ohm minimum impedance remains within the capability of mainstream AV receivers and integrated amplifiers in the recommended 40 to 120 watt range. The HiVe II rear ports are tuned to reduce the bass boom that often appears when slim towers sit close to a wall, but a little free space behind and beside the cabinets, plus slight toe-in toward the listening position, still gives the most precise imaging.

Building a Bronze system

Voicing is consistent across the 6G Bronze family, so the 200 works as the front pair in systems built with the matching centre channel, bookshelf surrounds and subwoofer from the same generation, and Bronze AMS modules can sit directly on top of the cabinets for Dolby Atmos height effects. Each speaker measures 886 by 166 by 265 mm including grille and terminals, or 909 by 229 by 304 mm including outrigger feet and spikes, and weighs 12.8 kg.

As a first floorstanding pair or a step up from bookshelf speakers, the Bronze 200 6G combines a room-friendly footprint with the driver’s scale and low-frequency reach that make music and film sound complete in a typical living space.