
Beta Three DT2004 4-Channel Class D Power Amplifier
SKU BETA3-DT2004
Original price was: ₹120,000.₹65,000Current price is: ₹65,000. Save ₹55,000 (46%)
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
Beta Three DT2004 is a 4-channel Class D power amplifier for appropriately matched passive PA loudspeakers.
- 4 power-amplifier channels.
- Class D output design.
- 550W/channel at 8 ohms.
- 850W/channel at 4 ohms.
Currently out of stock
Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

Product highlights
- BrandBeta Three
- Power Output550W RMS per channel at 8 ohms; 850W RMS per channel at 4 ohms
- Channels4
- Amplifier TypeClass D
- Damping FactorGreater than 1000 at 8 ohms, 100 Hz
- Signal to Noise RatioGreater than 102 dB
Description
Beta Three DT2004 4-Channel Class D Power Amplifier
The Beta Three DT2004 is a four-channel Class D power amplifier for passive PA and installed loudspeaker systems. Four independent channels in a single 2U rack unit let one amplifier drive a main pair plus fills, separate zones, or a set of stage monitors, instead of filling the rack with two stereo amplifiers.
Beta Three rates the DT2004 at 550 watts RMS per channel into 8 ohms and 850 watts RMS per channel into 4 ohms. Those are the figures to plan around, quoted with their loads as published in the manufacturer’s datasheet. The model number is a series identifier, not a wattage, and system design should always start from the per-channel rating that matches the impedance of the cabinets on each channel.
Key features
- 4 independent power amplifier channels in a 2U rackmount chassis
- 550W RMS per channel at 8 ohms; 850W RMS per channel at 4 ohms
- Class D output stage for high power with controlled heat and weight
- Damping factor greater than 1000 at 8 ohms for tight loudspeaker control
- Signal-to-noise ratio greater than 102 dB
- Switchable input sensitivity: 0.775V, 1V or 32 dB gain
- 4 XLR inputs and 4 NL4 speaker outputs
- Dual temperature-controlled cooling fans
Four channels, one rack unit pair
Installed systems rarely divide neatly into pairs of speakers. A hall may need a main left and right, a delay fill and a foyer feed; a venue stage may need four separate monitor mixes. Four discrete channels, each with its own XLR input and NL4 output, map directly onto that kind of layout, with per-channel level planning done at the mixer or system processor feeding the amplifier. Total harmonic distortion below 0.1 percent at 8 ohms and 1 kHz, and intermodulation distortion below 0.5 percent, keep the output clean at working levels, while the high damping factor helps the amplifier keep control of large cone drivers on bass-heavy programme.
Set the gain structure correctly
The switchable input sensitivity is a practical detail that matters in mixed systems. Choose 0.775V or 1V sensitivity, or fixed 32 dB gain, so the DT2004 matches the output level of the console or DSP in front of it. Correct gain structure keeps the noise floor low and leaves headroom where it belongs. Frequency response is specified at 20 Hz to 20 kHz, covering the full range of the cabinets this amplifier class is normally paired with, from compact fills to full-range PA boxes and subwoofer duty on appropriately rated channels.
Built for installed and touring racks
Cooling is handled by dual fans under temperature control, so fan speed follows the amplifier’s workload rather than running at full speed in quiet venues. The chassis measures 482 x 89 x 380 mm and weighs 15.5 kg net, a standard 19-inch 2U format that mounts in any equipment rack. Power supply is 220-230V AC at 50/60 Hz as specified for this model, with a rated power consumption of 5A, figures your electrical plan for the rack should reflect.
Choosing the DT2004
Pick the DT2004 when your loudspeaker plan needs four genuinely independent drive channels with substantial per-channel power, whether that is a zoned installation, a multi-way system with processor control, or a monitor rig. Match each channel’s load to the published 8-ohm and 4-ohm ratings, wire speakers on NL4 connectors with suitable cable, and feed it from a mixer or processor that provides the crossover, limiting and EQ the cabinets require.
Buying guide: Amplifier Buying Guide
Complete your setup: Pair the Beta Three DT2004 4-Channel Class D Power Amplifier with the JBL Stage 2 250B Bookshelf Loudspeaker, 5.25″ Woofer, 1″ Tweeter (Black) and the JBL SRX728S Dual 18-Inch Subwoofer.
Additional Information
Specifications
| Brand | Beta Three |
|---|---|
| Power Output | 550W RMS per channel at 8 ohms; 850W RMS per channel at 4 ohms |
| Channels | 4 |
| Amplifier Type | Class D |
| Damping Factor | Greater than 1000 at 8 ohms, 100 Hz |
| Signal to Noise Ratio | Greater than 102 dB |
| Inputs | 4 x XLR |
| Model | DT2004 |
| Frequency Response | 20 Hz to 20 kHz, plus/minus 2 dB |
| Total Harmonic Distortion | Less than 0.1 percent at 8 ohms, 1 kHz |
| Input Sensitivity | 0.775V / 1V / 32 dB, switchable |
| Speaker Outputs | 4 x NL4 |
| Cooling | Dual temperature-controlled fans |
| Power Supply | 220-230V AC, 50/60 Hz; rated consumption 5A |
| Dimensions | 482 x 89 x 380 mm (W x H x D); 2U rackmount |
| Weight | 15.5 kg (net) |
| Model / SKU | BETA3-DT2004 |
| Category | Amplifier |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The Beta Three DT2004 4-Channel Class D Power Amplifier comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.







