
Neutrik NTP3RC-B Plug 3.5mm Right Angle Black/gold
SKU NEUTRIK-NTP3RC-B-PLUG-3
₹3,884
- Price includes GST, invoice provided
- Dispatched the same day
- Cash on delivery up to ₹45,000
- Money-back if it arrives damaged
The Neutrik NTP3RC-B is a professional right-angle 3.5mm TRS plug in black/gold finish, built to Neutrik’s legendary durability standards for stage and studio use. Available at ProAudio Video India.
Currently out of stock
Tap to send us a WhatsApp message. We’ll reply as soon as it’s back in stock, and can suggest a similar model in the meantime.

Product highlights
- BrandNeutrik
- Connector Type3-pole 3.5 mm audio plug, right angle, male
- ContactsBrass with gold plating, 0.2 micrometre Au
- ShellZinc diecast with black chromium plating
- Strain ReliefChuck type with rubber gland, Polyacetal (POM)
- Cable Diameter2.0 to 4.5 mm outside diameter
Description
Neutrik NTP3RC-B 3.5mm Right-Angle Plug
The Neutrik NTP3RC-B is a 3-pole 3.5 mm audio plug with a right-angled, all-metal body, solder termination and gold-plated contacts. Neutrik describes its right-angle design as the only metal-bodied 3.5 mm jack plug with a chuck type strain relief, and that one detail explains why this small connector is specified by cable builders, broadcast technicians and repair workshops: the chuck clamps the cable itself, so a tug loads the clamp rather than the three fine solder joints inside.
It is the B variant of the NTP3RC family: black chromium shell plating with gold contacts, in place of the standard version’s nickel finish. Everything else follows Neutrik’s published data for the model: a zinc diecast shell, brass contacts, solder termination for wires up to 24 AWG, and a cable entry that accepts cables from 2.0 to 4.5 mm in outside diameter.
Key features
- 3-pole 3.5 mm (TRS) right-angle plug for stereo audio connections
- All-metal zinc diecast housing for a robust, reliable termination
- Gold-plated brass contacts, 0.2 micrometre gold plating
- Black chromium shell finish, the B variant
- Chuck type strain relief with rubber gland for excellent cable protection
- Accepts cables from 2.0 to 4.5 mm outside diameter
- Solder contacts for wires up to 0.22 square mm (24 AWG)
- Slim, space-saving profile for crowded panels and portable devices
- Rated voltage below 50 V; insulation resistance above 2 gigaohms (initial)
- Temperature range minus 20 degrees C to plus 65 degrees C
Why the Right Angle Matters
A straight plug in a portable recorder, wireless bodypack transmitter or camera acts as a lever: every knock applies force at the socket, and the cable exits into whatever space the device is sitting in. The NTP3RC-B turns the cable through ninety degrees at the plug, so it leaves along the face of the device instead of sticking out of it. The connection sits lower, snags less, and puts far less bending stress on both the socket and the cable entry, which is where small-diameter cables usually fail.
Chuck Strain Relief, Explained
Most miniature plugs rely on a crimped tab or a moulded bend relief to hold the cable. Neutrik’s chuck works like the chuck of a drill: as the bushing is tightened, it clamps the cable jacket evenly around its circumference. The pull force from a snagged cable is taken by that clamp, the solder joints carry only the electrical connection, and the rubber gland seals and supports the cable where it exits. For cables that will be coiled, carried and pulled daily, that is the difference between a termination that lasts for years and one that works loose in months.
Gold Contacts and Solder Termination
The B variant’s gold contact plating resists the oxidation and corrosion that raise contact resistance and cause crackle in nickel contacts over time, which matters on low-level microphone and headphone signals. Termination is by soldering: tip, ring and sleeve contacts take wires up to 24 AWG, and a properly made solder joint gives a gas-tight, mechanically sound connection that suits both one-off custom cables and small production runs. Assembly is straightforward, with the slim body keeping neighbouring plugs accessible on tightly spaced sockets.
Typical Uses
Custom headphone and earphone cables; lavalier and miniature microphone leads for portable recorders and wireless systems; patch and interconnect cables for compact mixers, cameras and field recorders; and workshop repairs where a failed moulded plug is being replaced with a serviceable, professional termination.
This listing is for a single NTP3RC-B plug, supplied unterminated for soldering to your cable. Full technical data from Neutrik is summarised in the Additional Information table on this page.
Additional Information
Specifications
| Brand | Neutrik |
|---|---|
| Connector Type | 3-pole 3.5 mm audio plug, right angle, male |
| Contacts | Brass with gold plating, 0.2 micrometre Au |
| Shell | Zinc diecast with black chromium plating |
| Strain Relief | Chuck type with rubber gland, Polyacetal (POM) |
| Cable Diameter | 2.0 to 4.5 mm outside diameter |
| Termination | Solder contacts |
| Wire Size | Up to 0.22 square mm, 24 AWG |
| Rated Voltage | Below 50 V |
| Dielectric Strength | 1 kVdc |
| Insulation Resistance | Above 2 Gohm (initial) |
| Insert Material | Polyamide PA 6.6, 15 percent glass reinforced |
| Temperature Range | Minus 20 degrees C to plus 65 degrees C |
| Solderability | Complies with IEC 68-2-20 |
| Sold As | Single plug, unterminated |
| Model / SKU | NEUTRIK-NTP3RC-B-PLUG-3 |
| Category | Connector |
| Condition | Brand new, sealed box |
| Warranty | Official manufacturer warranty (India) |
| GST invoice | Yes, input credit available |
Warranty Information
Buy with peace of mind. The Neutrik NTP3RC-B Plug 3.5mm Right Angle Black/gold comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
- Official Indian warranty, as specified by the manufacturer
- GST invoice with every order, needed for warranty claims
- We help you raise and follow up warranty claims with the brand
Delivery and Shipping
- Same-day dispatch on most in-stock orders
- Delivery anywhere in India; delivery time depends on your location
- Shipped securely in the original manufacturer box
- Cash on delivery available on orders up to ₹45,000
- Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Payment and Security

Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.







