Bose DESIGNMAX DM3C In-Ceiling Loudspeaker (Pair)

Bose DESIGNMAX DM3C In-Ceiling Loudspeaker (Pair)

The Bose DesignMax DM3C is built for commercial and home ceiling installations. Key specifications include configuration Coaxial two-way in-ceiling loudspeaker, sold as a pair; woofer 3.25 inch (83 mm); tweeter 0.75 inch (20 mm) neodymium dome, coaxially mounted. This listing covers the exact model named above – check the specification table before ordering if you are matching it to an existing system or replacing a unit.

Why Choose Bose DesignMax DM3C?

The Bose DesignMax DM3C is chosen for dependable performance in its class, with the specifications and connections listed on this page.

Every figure in the specification table is taken from the manufacturer’s published data for the Bose DesignMax DM3C, so what you plan around is what the product is rated to do. Where a rating depends on conditions (room size, load, programme type), plan with a margin rather than at the limit.

Key Features

• Coaxial 3.25 inch woofer and 0.75 inch neodymium dome tweeter with Dispersion Alignment system
• 135 degree conical coverage for even sound across the listening area
• 30 W long-term power handling with 70V/100V transformer taps and 8 ohm bypass
• Minimum-bezel magnetic grille for a clean ceiling finish
• QuickHold mounting arms for fast, secure installation
• Sold and priced as a pair

Best Suited For

The Bose DesignMax DM3C suits buyers who need exactly this model and specification – for a new setup, an expansion of an existing system, or a like-for-like replacement. If you are unsure about compatibility (impedance, line voltage, fit or capacity), check the table below or ask us before ordering.

For larger spaces or higher output than the Bose DesignMax DM3C offers, consider stepping up within the same range rather than running a smaller unit at its limit.

Setup and Connection Guide

Ceiling speakers must be installed into a suitable ceiling void with the correct cut-out and wired to a compatible amplifier (check impedance and line voltage in the specifications). Professional installation is recommended.

Keep the Bose DesignMax DM3C clean with a dry cloth, protect it from moisture beyond its rating, and keep ventilation paths clear in daily use. Retain the invoice and box for any future service needs.

Before ordering the Bose DesignMax DM3C, measure the space and check the connections it needs against the specifications above – a few minutes of planning avoids most surprises later. If the Bose DesignMax DM3C is replacing an older unit, compare mounting, load and capacity figures one by one rather than assuming they carry over from the old model.

Frequently Asked Questions

Is the Bose DesignMax DM3C genuine and brand new?

Yes – this is a brand-new, sealed unit of the Bose DesignMax DM3C supplied with GST invoice. Box contents are listed in the specifications table.

What are the key specifications of the Bose DesignMax DM3C?

Configuration coaxial two-way in-ceiling loudspeaker, sold as a pair; woofer 3.25 inch (83 mm); tweeter 0.75 inch (20 mm) neodymium dome, coaxially mounted. The full manufacturer specification is in the Technical Specifications table below.

Full listing reference: Bose DesignMax DM3C listing.

Technical Specifications

Explore Related Products

Building a complete setup? Explore the Bose DesignMax DM2C-LP In-Ceiling Speakers (Pair) option as well.