The NEUTRIK NA3MM XLR Male to XLR Male Adapter is a compact, prewired gender-conversion adapter that joins two 3-pole XLR female connectors, turning a cable run around or fixing a gender mismatch without a soldering iron. Built on Neutrik’s XX series with a rugged zinc diecast shell and a latch lock, the NEUTRIK NA3MM gives stage, studio and install work a reliable, professional-looking link that interlocks firmly and transmits cleanly. Its silver-plated contacts, low contact resistance and compact space-saving design make the NEUTRIK NA3MM the adapter that lives in every competent cable kit, ready for the moment a female-to-female join is needed.
Why Choose the NEUTRIK NA3MM XLR Male to XLR Male Adapter?
Gender mismatches always appear at the worst moment: a guest microphone with the wrong cable end, a splitter output that needs turning around, a DMX or audio run that ends female at both sides. The NEUTRIK NA3MM solves the problem in seconds with a single barrel adapter, instead of a new cable or a re-soldered connector. Because it uses Neutrik’s proven XX series construction, with brass contacts, a polyamide insert and a diecast shell, the NEUTRIK NA3MM survives the plugging, coiling and stepping that kills cheap adapters, and its latch lock keeps the connection secure through a show. It is a small part, but it is the part that saves a session.
Key Features
Male-to-male gender conversion: Joins two 3-pole XLR female connectors, converting gender in either direction.
XX series construction: Professional look and compact, space-saving design based on Neutrik’s XX series.
Latch lock: A positive latch lock keeps the adapter mated securely during use.
Low contact resistance: Contact resistance of 3 milliohms or less for clean, lossless signal transfer.
Rugged diecast shell: Zinc diecast housing with brass contacts and polyamide insert for long service life.
Prewired and ready to use: A versatile, prewired adapter that reliably interlocks different connector systems with no assembly.
Best Suited For
The NEUTRIK NA3MM suits live sound engineers, studio technicians, AV installers and lighting operators who carry adapters for XLR audio and DMX runs. It belongs in stage boxes, cable kits, install toolboxes and broadcast flypacks anywhere XLR cables are joined, extended or turned around. Note that the standard nickel NEUTRIK NA3MM is an audio and signal adapter and is not intended for loudspeaker applications, which need speakON connectors instead.
Setup and Connection Guide
Push the NEUTRIK NA3MM into the first XLR female connector until the latch engages, then mate the second female connector to the other end and confirm both latches are seated. Route the joined cables with a gentle service loop and strain relief so the adapter itself never carries the cable weight, and keep the adapter out of foot traffic where possible. To release, press the latch tab and pull straight out; never twist or yank a latched XLR connection. For permanent installs, label the adapter position on the cable schedule so the next technician finds the gender change at a glance.
Frequently Asked Questions
What does the NEUTRIK NA3MM connect?
The NEUTRIK NA3MM connects two 3-pole XLR female connectors, acting as a male-to-male gender-conversion adapter for audio and DMX signal runs.
Is the NEUTRIK NA3MM the same as the NA3MM-B?
No. The NEUTRIK NA3MM is the standard nickel-plated version, while the NA3MM-B is the black-plated variant. This listing is for the standard NEUTRIK NA3MM.
Can the NEUTRIK NA3MM carry loudspeaker signals?
No. The NEUTRIK NA3MM is a signal adapter and is not for loudspeaker applications. Use speakON connectors such as the Neutrik NL4FX for speaker-level connections.
Technical Specifications
Connector type
3-pole XLR male to 3-pole XLR male, gender-conversion adapter
Series
Neutrik XX series
Locking device
Latch lock
Contact resistance
3 milliohms or less
Dielectric strength
1.5 kVdc
Insulation resistance
Greater than 2 Gohm
Contact plating
Silver (2 micrometre Ag); contacts brass
Insert
Polyamide (PA 6.6, 30 percent glass reinforced)
Shell
Zinc diecast, nickel plating
Temperature range
-20 °C to +65 °C
Application note
Not for loudspeaker applications
Explore Related Products
Use it with any XLR microphone, such as the Neumann U87AI Studio Set, whenever a cable run needs turning around.
Additional Information
Specifications
Brand
Neutrik
Model / SKU
NEUTRIK-NA3MM
Category
Connector
Condition
Brand new, sealed box
Warranty
Official manufacturer warranty (India)
GST invoice
Yes, input credit available
Warranty Information
Buy with peace of mind. The NEUTRIK NA3MM XLR Male to XLR Male Adapter comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
Official Indian warranty, as specified by the manufacturer
GST invoice with every order, needed for warranty claims
We help you raise and follow up warranty claims with the brand
Delivery and Shipping
Same-day dispatch on most in-stock orders
Delivery anywhere in India; delivery time depends on your location
Shipped securely in the original manufacturer box
Cash on delivery available on orders up to ₹45,000
Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.
