The Electro-Voice LRC-2100-B is built for buyers who want proven professional performance without compromise, and this listing covers what it does, who it suits, and how to set it up. Whether it is going into a venue, a studio, a place of worship or a creator desk, the Electro-Voice LRC-2100-B earns its place by doing its core job exceptionally well, with the build quality and control expected from its brand.
Why Choose the Electro-Voice LRC-2100-B?
The LRC-2100-B is the column for spaces where a smaller speaker simply runs out of reach: large houses of worship, transport halls and auditoriums where speech must stay intelligible across a long, reverberant room. Twelve mid-high drivers and two band-pass woofers produce a controlled beam that puts sound on the audience and keeps it off reflective walls, while the switchable narrow/wide vertical pattern lets the installer tune the throw to the room. It is a low-impedance design, so it pairs with a conventional amplifier rather than a distributed line, and its weatherised build extends the same control outdoors. The Electro-Voice LRC-2100-B is a practical, long-term choice: it is designed to be used daily, to integrate with the rest of a system, and to keep performing long after cheaper alternatives have been replaced.
Key Features
Long-throw speech clarity: the 950 mm column focuses sound into a controlled beam, so words stay intelligible at distances where point sources fall apart.
Two coverage patterns in one: switchable narrow and wide vertical dispersion adapts the column to deep halls or broad seating areas without changing hardware.
Real low-frequency weight: two 6.5-inch band-pass woofers extend the response to 45 Hz, giving music and announcements a full, natural body.
Precise aiming: the SwifTilt bracket tilts 0 to 25 degrees down and pans +/-80 degrees, with a built-in -7.5 degree acoustic down-tilt.
Built for exposed locations: full-exposure IP55 weatherisation, M8 suspension points and a gland nut weather cover suit demanding indoor and outdoor installs.
Best Suited For
The LRC-2100-B suits cathedrals and large houses of worship, airports and stations, sports halls, auditoriums, museums and outdoor plazas where long, controlled speech and music coverage from a single column is required.
Setup and Connection Guide
Mount the LRC-2100-B on its SwifTilt bracket or M8 suspension points, aiming the column's beam at the audience with the down-tilt set for the seating rake. Wire the 4-pin Phoenix input from an 8-ohm amplifier channel with a 50 Hz high-pass filter (Butterworth, 24 dB/octave) engaged, and use the pass-through for the next column in the run. Select narrow or wide vertical coverage to match the room depth, then verify intelligibility from the farthest seat. Take a few minutes to test the Electro-Voice LRC-2100-B at working volume before the event or session, so levels, placement and presets are settled well in advance.
Frequently Asked Questions
Does the LRC-2100-B work on a 70/100 V line system?
No. The LRC-2100-B is a low-impedance-only design with no transformer taps, so it connects to a conventional 8-ohm amplifier. The smaller LRC-1060 and LRC-1100 are the tapped models in the range.
What does the B in LRC-2100-B mean?
The B suffix denotes the black finish. The white version is a separate part, the LRC-2100-W, so this listing is specifically for the black column.
How is the LRC-2100-B different from the LRC-1060-B?
The LRC-2100-B is nearly twice as tall, with twelve mid-high drivers and two 6.5-inch woofers, 600 W program handling and deeper bass, for larger and more reverberant spaces than the compact LRC-1060-B.
Technical Specifications
Model
LRC-2100-B (B = black)
Mid-high drivers
12 x 2.5 inch
Woofers
2 x 6.5 inch (165 mm) in band-pass
Design
2-way passive
Power handling
300 W continuous / 600 W program
Impedance
8 ohms (low impedance only)
Transformer taps
Not applicable (no 70/100 V transformer)
Frequency range (-10 dB, half space)
45 Hz – 16 kHz
Sensitivity
92 dB
Maximum SPL
129 dB peak
Coverage
140 degrees horizontal x 25/45 degrees vertical (narrow/wide switchable)
Acoustic down-tilt
-7.5 degrees
High-pass recommendation
50 Hz minimum, Butterworth 24 dB/octave
Connector
4-pin Phoenix/Euroblock input with pass-through (10 AWG maximum)
Suspension points
4 x M8
Mounting
SwifTilt bracket: 0-25 degrees down-tilt, +/-80 degrees pan
If the Electro-Voice LRC-2100-B fits your setup, the Electro-Voice LRC-2100-B also pairs well with the Electro-Voice EVID 6.2T surface-mount speaker from the same store catalogue, and you can check the manufacturer’s reference for full detail: Electro-Voice LRC-2100 product page. Buying from a listing with verified specifications means the product you receive matches the product described here.
Additional Information
Specifications
Brand
Electro-Voice
Colour
Black
Drivers
12 x 2.5 inch mid-high + 2 x 6.5 inch woofers
Power Handling
600 W program
Impedance
8 ohms
Type
Line radiator column loudspeaker
Model / SKU
ELECTRO-VOICE-LRC-2100-B
Category
Wall Speakers
Condition
Brand new, sealed box
Warranty
Official manufacturer warranty (India)
GST invoice
Yes, input credit available
Warranty Information
Buy with peace of mind. The Electro-Voice LRC-2100-B Line Radiator Column Loudspeaker - Black comes with the official manufacturer’s warranty for India, valid from the date on your GST invoice. Pro Audio Video is a specialist audio video store, and every product we sell is brand new, sealed and sourced through authorised channels, so your warranty is honoured at brand service centres across India.
Official Indian warranty, as specified by the manufacturer
GST invoice with every order, needed for warranty claims
We help you raise and follow up warranty claims with the brand
Delivery and Shipping
Same-day dispatch on most in-stock orders
Delivery anywhere in India; delivery time depends on your location
Shipped securely in the original manufacturer box
Cash on delivery available on orders up to ₹45,000
Tracking details by SMS and email as soon as your order ships
Returns and Refunds
Not right for you? Return unused products in their original packaging within 7 days of delivery. If a product arrives damaged or defective, tell us within 48 hours with photos and we will replace it or refund you in full.
Pay securely with UPI (Google Pay, PhonePe, Paytm), RuPay, Visa, Mastercard and American Express cards and other options shown at checkout. Payments are processed over an encrypted connection by trusted payment partners; we never see or store your card details.
